| Characteristics and description |
|---|
Company name NOVATECH LLC |
The purpose of the floor and the room itself Concrete floor in a warehouse in Sergiev Posad district of the Moscow region |
Type of floor topping floors |
Thickness of the concrete layer 11 cm |
Room area 740 m² |
The warehouse owner turned to us for a floor device. The expected loads were 1 ton per 1 square meter; the actual base consisted of old concrete and sand in places.
The technical solution was chosen for this object as follows – a concrete floor with a hardener, reinforced with plastic macrofibre and additionally reinforced with mesh.
Terms of work Number of days for all work: 15 |
Requirements for the quality of work Floors must comply with SNiP 2.03. 13-88 |
Appearance of floors Must look presentable |
Durability Service life of floors without repair (years): 10 |
Total cost Budget within the framework of: 2 439 880 ₽ |
The floor arrangement was carried out in three stages – this is an actual warehouse with racks, and the customer could not stop the work of the entire room. Therefore, in each of the stages we managed to cover a third of the area.
The customer's warehouse is now provided with a solid concrete floor, which, with proper operation and proper care, will serve faithfully for many, many years.
We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.
We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.
Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.
Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.