Portfolio
Concrete floor with a hardener for a car service station near the Yuzhnaya metro station in Moscow

CONCRETE FLOOR WITH A HARDENER FOR A CAR SERVICE NEAR THE YUZHNAYA METRO STATION IN MOSCOW

WE HAVE SAVED FOR THE CLIENT 162 800 ₽

20%Economy

FLOOR ENGINEERING CONSTRUCTION Concrete floor with a hardener for a car service station near the Yuzhnaya metro station in Moscow

11B Kirovogradskaya str., Moscow

Characteristics and description
Company name LLC "LR-YUG"
The purpose of the floor and the room itself Concrete floor with a hardener for a car service station near the Yuzhnaya metro station in Moscow
Type of floor topping floors
Thickness of the concrete layer 11 cm
Room area 385 m²

Customer needs AND THE OPTIMAL ENGINEERING SOLUTION

factors taken into account when developing the floor design

WE HAVE SELECTED THE OPTIMAL ENGINEERING SOLUTION

The owner of the service station applied for the installation of a concrete floor and additional work on the installation of an outdoor ramp and the installation of trays inside.

After making a detailed technical assessment of the facility, our production department, headed by the chief designer, determined such a technical solution – a concrete floor with topping, reinforced with plastic macrofibre and installed water intake trays; an external ramp made of concrete with combined reinforcement.

Terms of work

Number of days for all work: 10

Requirements for the quality of work

Floors must comply with SNiP 2.03. 13-88

Appearance of floors

Must look presentable

Durability

Service life of floors without repair (years): 10

Total cost

Budget within the framework of: 814 300 ₽

Concrete floor with a hardener for a car service station near the Yuzhnaya metro station in Moscow: The object before the start of work — The object before the start of work

Floor arrangement ACCORDING TO THE ENGINEERING SOLUTION FOR THE OBJECT: LLC "LR-YUG"

how we implemented this floor design

FEATURES OF THE WORK

Despite the small area of the facility, it turned out to be difficult. Firstly, during the arrival of the brigade for preparatory work, it turned out that in one area the existing grounds did not allow to act according to the plan. The workers left and waited for the customer to carry out the dismantling on their own.

Secondly, here, in addition to the actual installation of a concrete floor with a hardener, we did: an outdoor ramp with preliminary dismantling; installation of trays and sand traps indoors and, as a result, a floor with slopes.

Thirdly, two types of topping were used at the grout stage – ordinary gray for most of the area and colored for two rooms.

OUR RESULTS

If we compare the floor in the car service before work and now, then the difference is huge. Moreover, it is already visible how he shows himself in business, since the object is being exploited with might and main. We hope that over time the customer will appreciate the product of our work.

Stages of implementation engineering design of the floor

engineering design of the floor

Dismantling under the ramp and sand traps

The reinforcement frame is laid under the ramp

Application of moisture-retaining impregnation

Checking the depth of the shrinkage joints

The result of floor engineeringDELIVERED ON TIME, STANDARD, TECHNOLOGICAL INDUSTRIAL FLOORS AT THE FACILITY LLC "LR-YUG"

SEE THE RESULT OF OUR WORK

READ REVIEWS OUR SATISFIED CUSTOMERS

Reviews that we managed to collect between production cycles at our facilities

ReviewsABOUT THE PROFTEHPOL PROJECT

We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.

We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.

Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.

Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.

Our clients Which we are proud of

for which we have made good floors