| Characteristics and description |
|---|
Company name SU-17 LLC |
The purpose of the floor and the room itself Concrete floor with a hardener for the production building of LLC "SU-17", Balashikha |
Type of floor topping floors |
Thickness of the concrete layer 170 cm |
Room area 256 m² |
The general contractor acted as the customer. The task for this facility is to fill the concrete floor on the production building with a ready–made, connected reinforcement frame. I.e., the general contractor prepared the base and performed reinforcement on his own, and also supplied concrete and a concrete pump himself.
The following aspects are important to the customer:
Terms of work Number of days for all work: 30 |
Requirements for the quality of work Floors must comply with SNiP 2.03. 13-88 |
Appearance of floors Must look presentable |
Durability Service life of floors without repair (years): 20 |
Total cost Budget within the framework of: 399 000 ₽ |
The concrete supplied by the customer turned out to be with additives, which increased its hardening time. For topping, such a factor is unfavorable. Our workers have done their best to minimize the consequences of such concrete. The second difficulty is that the concrete pump broke twice during the installation of the floor. The third difficulty is that a foundation for equipment was previously installed on this site, which made some areas of the floor difficult to access both for pouring and for subsequent processing of topping machines.
Due to several difficulties that arose during different stages of the coating device, we completed the work 10 hours later. Nevertheless, the customer was satisfied with the result and said that, if necessary, he would give a positive recommendation. For us, this production building is the third completed facility in Balashikha.
The stages of the floor arrangement and the result of the work are shown in the photo below.
We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.
We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.
Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.
Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.