Portfolio
Concrete floor with a reinforcing top layer for the production shop in Vykhino

INDUSTRIAL FLOOR FOR THE WORKSHOP IN THE VYKHINO METRO AREA

WE HAVE SAVED FOR THE CLIENT 684 800 ₽

FLOOR ENGINEERING CONSTRUCTION Concrete floor with a reinforcing top layer for the production shop in Vykhino

Moscow, Kosinskaya str., 9, p. 17

Characteristics and description
Company name Tandem LLC
The purpose of the floor and the room itself Concrete floor with a reinforcing top layer for the production shop in Vykhino
Type of floor topping floors
Thickness of the concrete layer 150 cm
Room area 849 m²

Customer needs AND THE OPTIMAL ENGINEERING SOLUTION

factors taken into account when developing the floor design

WE HAVE SELECTED THE OPTIMAL ENGINEERING SOLUTION

Initially, the customer approached us with a proposal to make a floor according to its design with reinforcement with a dozen fittings, and the fittings at their facility were already connected by area. During the negotiations, we offered our design options and eventually agreed that we would use combined reinforcement – reinforcement + polypropylene fiber.

The loads on the floor in the room were expected to be average. We chose a standard technical solution – a concrete floor with topping.

The following aspects are important to the customer:

Terms of work

Number of days for all work: 14

Requirements for the quality of work

Floors must comply with SNiP 2.03. 13-88

Appearance of floors

Must look presentable

Durability

Service life of floors without repair (years): 10

Total cost

Budget within the framework of: 3 423 900 ₽

Concrete floor with a reinforcing top layer for the production shop in Vykhino: The object before the start of work — The object before the start of work

Floor arrangement ACCORDING TO THE ENGINEERING SOLUTION FOR THE OBJECT: Tandem LLC

how we implemented this floor design

FEATURES OF THE WORKS

For some reason, it turned out that we disassembled and re-connected all the fittings connected in advance by the customer's forces.

It was a pleasure to work with this client, as various unpredictable moments that arose in the course of work were solved immediately. For example, it was planned to fill only one room at first, but the customer suddenly decided to demolish the wall. As a result, we waited until he had completed his part of the work, after which we continued pouring over the entire area. Usually, under such circumstances, the deadlines are greatly stretched, but our customer met in just 2 days.

Due to our technical reasons, we had to postpone the filling for one day during the work. The client was sympathetic to this situation and even offered his own help in solving it.

OUR RESULTS

The customer liked the results of the work. He looked at almost everything after filling and said that he was satisfied with everything. Immediately after the work, payment was made to us without delay.

Stages of implementation engineering design of the floor

engineering design of the floor

The pump is installed, mixers are on the way

A moisture-retaining impregnation was applied

The result of floor engineeringDELIVERED ON TIME, STANDARD, TECHNOLOGICAL INDUSTRIAL FLOORS AT THE FACILITY Tandem LLC

SEE THE RESULT OF OUR WORK

READ REVIEWS OUR SATISFIED CUSTOMERS

Reviews that we managed to collect between production cycles at our facilities

ReviewsABOUT THE PROFTEHPOL PROJECT

We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.

We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.

Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.

Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.

Our clients Which we are proud of

for which we have made good floors