Our engineering in action
On the example of the floor arrangement for the largest transport and logistics center of Belarus "Prilesye"

CONCRETE FLOOR WITH COLORED TOPPING IN A MOSCOW PRODUCTION FACILITY

WE HAVE SAVED FOR THE CLIENT 971 700
20%Economy
Concrete floor with colored topping in a Moscow production facility

FLOOR ENGINEERING CONSTRUCTION Concrete floor with colored topping in a Moscow production facility

Moscow, Sadovniki street, building 3
Characteristics and description
Company name
LLC "Chasovoj"
The purpose of the floor and the room itself
Concrete floor with colored topping in a Moscow production facility
Type of floor
topping floors
Thickness of the concrete layer
15 cm
Room area
620 m²

Customer needs AND THE OPTIMAL ENGINEERING SOLUTION

factors taken into account when developing the floor design

WE HAVE SELECTED THE OPTIMAL ENGINEERING SOLUTION

The customer contacted us for the installation of an industrial floor for a basement production facility near Kotelniki metro station. The expected loads were as follows: dynamic – carts with cargo, static – machines weighing from 300 kg to 2.5 tons.

The final selected structure turned out to have a very large margin of safety (as the client wanted): a concrete floor with a white topping with an average thickness of 150 mm, reinforced with a single layer of reinforcement frame and steel fiber.

Terms of work
Number of days for all work: 10
Requirements for the quality of work
Floors must comply with SNiP 2.03. 13-88
Appearance of floors
Must look presentable
Durability
Service life of floors without repair (years): 10
Total cost
Budget within the framework of: 4 858 400 ₽
Concrete floor with colored topping in a Moscow production facility: The object before the start of work
The object before the start of work

Floor arrangement ACCORDING TO THE ENGINEERING SOLUTION FOR THE OBJECT: LLC "Chasovoj"

how we implemented this floor design

FEATURES OF THE WORK

One of the difficulties during the production process was that we had to carry reinforcement, topping and other materials manually from the elevator.

There was nowhere to drain the remaining concrete, so special boxes were made – one for the concrete pump and one for the mixers. After the concreting work, a water pumping machine was called; then the workers hollowed out the concrete in a box and finally loaded it into a container.

OUR RESULTS

There were some comments from the client, but we quickly eliminated them and handed over the finished floor for use with characteristics that meet expectations and requirements.

Stages of implementation engineering design of the floor

engineering design of the floor
1.jpg
Laying the film
2.jpg
We are pasting a damping tape on the walls and columns
3.jpg
Reinforcement
4.jpg
Additional lighting has been installed
5.jpg
Installation of non-removable formwork
6.jpg
Concrete pump on site
7.jpg
The site is fully ready for filling
8.jpg
Ready-made boxes for washing mixers
9.jpg
We are covering the car with a film next to the box
10.jpg
The filling is in full swing
11.jpg
Alignment of concrete according to the laser level
12.jpg
Grout has been completed
13.jpg
Applied nail polish
14.jpg
Cutting of shrink seams
15.jpg
Ready-made shrink seams
16.jpg
Checking the depth of the seams

The result of floor engineeringDELIVERED ON TIME, STANDARD, TECHNOLOGICAL INDUSTRIAL FLOORS AT THE FACILITY LLC "Chasovoj"

SEE THE RESULT OF OUR WORK
result-chasovoj-moskva-sadovniki.jpg

READ REVIEWS OUR SATISFIED CUSTOMERS

Reviews that we managed to collect between production cycles at our facilities

ReviewsABOUT THE PROFTEHPOL PROJECT

We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.

We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.

Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.

Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.

Our clients Which we are proud of

for which we have made good floors
Legal informationSociety Limited Liability "PROFTECHENGINEERING" Shareholdt International consumer society "GOLDEN AXIS"TIN 9709064635CHECKPOINT 770901001OGRN 1207700295406Legal address:109147, Moscow, B.Andronevskaya str., 23, building 1, floor 8, room 4, office of PROFTEHPOL company
POSTAL DETAILSActual address:109147, Moscow, B.Andronevskaya str., 23, building 1, floor 8, room 4, office of PROFTEHPOL companyPhone number for details:8 800 550 90 72E-mail:info@proftechpol.ru
Financial detailsCurrent account: 40702810870010234730MOSCOW BRANCH OF JSC CB "MODULBANK" MoscowBIC 044525092Correspondent account 30101810645250000092CEO of Nazyrov Anton