| Characteristics and description |
|---|
Company name Private person |
The purpose of the floor and the room itself Concrete floor with liquid and colored reinforcing top layer, MO, Odintsovo district, D. Shulgino |
Type of floor topping floors |
Thickness of the concrete layer 180 cm |
Room area 382.7 sq. m. |
The client wanted not only the practicality of the floor, but also aesthetics. We chose the appropriate type of coating – a concrete floor with a liquid and colored reinforcing top layer.
The following aspects were important to the customer:
Terms of work Number of days for all work: 11 |
Requirements for the quality of work Floors must comply with SNiP 2.03. 13-88 |
Appearance of floors Must look presentable |
Durability Service life of floors without repair (years): 10 |
Total cost Budget within the framework of: 406 000 ₽ |
The peculiarity of the work was that there were storm trays of a non-standard version, i.e. the floor was made adjacent to the tray grate itself, although according to the plan the grate should be inserted into the recess. Attention was not focused on this point. I had to cut and remove the floor along the tray to a width of 7 cm, make a cut next to the tray and insert a metal plate on the epoxy.
See below the photos of the stages of our work.
We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.
We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.
Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.
Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.