Our engineering in action
On the example of the floor arrangement for the largest transport and logistics center of Belarus "Prilesye"

CONCRETE FLOOR WITH TOPPING AT THE WAREHOUSE IN DZERZHINSKY

WE HAVE SAVED FOR THE CLIENT 549 000
20%Economy
Concrete floor with topping at the warehouse in Dzerzhinsky

FLOOR ENGINEERING CONSTRUCTION Concrete floor with topping at the warehouse in Dzerzhinsky

2a Alekseevskaya Street, Dzerzhinsky city, Moscow region
Characteristics and description
Company name
APIS STROY LLC
The purpose of the floor and the room itself
Concrete floor with topping at the warehouse in Dzerzhinsky
Type of floor
topping floors
Thickness of the concrete layer
14 cm
Room area
736 m²

Customer needs AND THE OPTIMAL ENGINEERING SOLUTION

factors taken into account when developing the floor design

WE HAVE SELECTED THE OPTIMAL ENGINEERING SOLUTION

In this case, the general contractor was the customer of the work for us. From the very beginning of the interaction, it became clear that he had already seen a lot on the construction site – this manifested itself in calmness and confidence.

It was necessary to carry out work in the warehouse, and our chief designer chose the following as the best technical solution – a concrete floor with a hardener reinforced with plastic fiber and in some places additionally reinforced with mesh.

Terms of work
Number of days for all work: 5
Requirements for the quality of work
Floors must comply with SNiP 2.03. 13-88
Appearance of floors
Must look presentable
Durability
Service life of floors without repair (years): 10
Total cost
Budget within the framework of: 2 745 300 ₽
Concrete floor with topping at the warehouse in Dzerzhinsky: The object before the start of work
The object before the start of work

Floor arrangement ACCORDING TO THE ENGINEERING SOLUTION FOR THE OBJECT: APIS STROY LLC

how we implemented this floor design

FEATURES OF THE WORK

From the very beginning, the customer trusted us, which had a very positive effect on all further production stages – there was no unnecessary stress and unnecessary worries.

A special feature of this facility was that there were seams in the existing base plate, and the client asked us to repeat their location in the new floor. Therefore, we developed a scheme that duplicated the existing cutting and at the same time met our standards.

OUR RESULTS

We made the warehouse floor on time, of the appropriate quality and taking into account all production requirements. Thus, we made our significant contribution to the general contractor's overall work package.

Stages of implementation engineering design of the floor

engineering design of the floor
1.jpg
Inspection of the seams in the base plate
2.jpg
We are covering the holes
3.jpg
The insulating seam has been prepared
4.jpg
Additional reinforcement of some sections with a grid
5.jpg
Mixing fiber in a mixer with concrete
6.jpg
Filling
7.jpg
After processing with grout machines, a moisture-retaining impregnation has been applied.
8.jpg
Checking the depth of the seams after cutting them

The result of floor engineeringDELIVERED ON TIME, STANDARD, TECHNOLOGICAL INDUSTRIAL FLOORS AT THE FACILITY APIS STROY LLC

SEE THE RESULT OF OUR WORK
result-apis-stroy-dzerzhinsky.jpg

READ REVIEWS OUR SATISFIED CUSTOMERS

Reviews that we managed to collect between production cycles at our facilities

ReviewsABOUT THE PROFTEHPOL PROJECT

We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.

We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.

Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.

Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.

Our clients Which we are proud of

for which we have made good floors
Legal informationSociety Limited Liability "PROFTECHENGINEERING" Shareholdt International consumer society "GOLDEN AXIS"TIN 9709064635CHECKPOINT 770901001OGRN 1207700295406Legal address:109147, Moscow, B.Andronevskaya str., 23, building 1, floor 8, room 4, office of PROFTEHPOL company
POSTAL DETAILSActual address:109147, Moscow, B.Andronevskaya str., 23, building 1, floor 8, room 4, office of PROFTEHPOL companyPhone number for details:8 800 550 90 72E-mail:info@proftechpol.ru
Financial detailsCurrent account: 40702810870010234730MOSCOW BRANCH OF JSC CB "MODULBANK" MoscowBIC 044525092Correspondent account 30101810645250000092CEO of Nazyrov Anton