Our engineering in action

On the example of the floor arrangement for the largest transport and logistics center of Belarus "Prilesye"

Portfolio
Concrete floor with topping for a warehouse in Stupinsky district

DURABLE BEAUTIFUL FLOOR FOR A WAREHOUSE IN STUPINSKY DISTRICT

WE HAVE SAVED FOR THE CLIENT 788 000 ₽

20%Economy

FLOOR ENGINEERING CONSTRUCTION Concrete floor with topping for a warehouse in Stupinsky district

MO, Stupinsky district, Konstantinovskoye settlement (near the village of Mikheevo), hangar No. 3

Characteristics and description
Company name AST-Plast LLC
The purpose of the floor and the room itself Concrete floor with topping for a warehouse in Stupinsky district
Type of floor topping floors
Thickness of the concrete layer 150 cm
Room area 1200 sq. m.

Customer needs AND THE OPTIMAL ENGINEERING SOLUTION

factors taken into account when developing the floor design

WE HAVE DETERMINED THE OPTIMAL ENGINEERING SOLUTION

At his hangar, the customer wanted to get a smooth, durable, beautiful floor with minimal overspending of concrete in the shortest possible time as a result of the work. After conducting a technical assessment, our chief engineer chose such a solution – a concrete topping floor with reinforcement mesh reinforcement. The filling was planned to be done in two stages – first one half, then the other.

The following aspects are important to the customer:

Terms of work

Number of days for all work: 10

Requirements for the quality of work

Floors must comply with SNiP 2.03. 13-88

Appearance of floors

Must look presentable

Durability

Service life of floors without repair (years): 5

Total cost

Budget within the framework of: 3 939 900 ₽

Concrete floor with topping for a warehouse in Stupinsky district: The object before the start of work — The object before the start of work

Floor arrangement ACCORDING TO THE ENGINEERING SOLUTION FOR THE OBJECT: AST-Plast LLC

how we implemented this floor design

DIFFICULTIES DURING WORK

The foundation before our work was done imperfectly, there was a pit in the corner of the hangar. Of course, the customer himself could devote some time to this and fix it on his own. However, we solved the situation in a different way - slightly increased the consumption of concrete. Yes, this resulted in a 10% overspend. However, if we take technical data, such a figure is quite a common phenomenon.

OUR RESULTS

Before the final delivery of the object, we fulfilled all the wishes of the customer – cleaned, washed, swept. As a result, he received an excellent reliable coating for his use, which also looks attractive.

Stages of implementation engineering design of the floor

engineering design of the floor

We accept the concrete mixture in the first half

We level the concrete mixture using the rule

Rubbed and patched the surface of the first half

We are preparing the second half of the warehouse to receive the concrete mixture

The result of floor engineeringDELIVERED ON TIME, STANDARD, TECHNOLOGICAL INDUSTRIAL FLOORS AT THE FACILITY AST-Plast LLC

SEE THE RESULT OF OUR WORK

READ REVIEWS OUR SATISFIED CUSTOMERS

Reviews that we managed to collect between production cycles at our facilities

ReviewsABOUT THE PROFTEHPOL PROJECT

We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.

We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.

Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.

Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.

Our clients Which we are proud of

for which we have made good floors