Our engineering in action
On the example of the floor arrangement for the largest transport and logistics center of Belarus "Prilesye"

CONCRETE SCREED AND PAINT POLYMER IN MOSCOW

WE HAVE SAVED FOR THE CLIENT 616 000

FLOOR ENGINEERING CONSTRUCTION Concrete screed and polymer paint coating for administrative and industrial premises

Moscow, Vishnevaya str., 11
Characteristics and description
Company name
LLC "Conversion-XXI"
The purpose of the floor and the room itself
Concrete screed and polymer paint coating for administrative and industrial premises
Type of floor
polymer floors
Thickness of the polymer coating
0.3 mm
Room area
1010 sq. m.

Customer needs AND THE OPTIMAL ENGINEERING SOLUTION

factors taken into account when developing the floor design

WE HAVE DETERMINED THE OPTIMAL ENGINEERING SOLUTION

At this facility, it was necessary to level the existing concrete base, or rather, the surface of the floor slab. It was also necessary to apply a polymer paint coating to this screed. Accordingly, as an engineering solution, we proposed, and the client agreed to a concrete screed and a polymer paint coating.

The following aspects are important to the customer:

Terms of work
Number of days for all work: 47
Requirements for the quality of work
Floors must comply with SNiP 2.03. 13-88
Appearance of floors
Must look presentable
Durability
Service life of floors without repair (years): 5
Total cost
Budget within the framework of: 3 081 000 ₽
Concrete screed and polymer paint coating for administrative and industrial premises: The object before the start of work
The object before the start of work

Floor arrangement ACCORDING TO THE ENGINEERING SOLUTION FOR THE OBJECT: LLC "Conversion-XXI"

how we implemented this floor design

DIFFICULTIES DURING WORK

The main difficulty in the production of these floors was the heterogeneity of the base. In other words, the foundation that was provided to us was not a clean slab. It looked like this: a floor slab, and on it – an old screed. And the old screed was in some places of good quality and strong enough, and in some places it was destroyed.

Where it was destroyed, it had to be additionally dismantled – somewhere on its own, somewhere the customer helped. And then it was necessary to level the places where the dismantling was carried out with other parts of the base with penoplex. Otherwise, there would be too much load on the floor slab, and this is dangerous. On the floor slabs, the thickness of the screed reached up to 26 centimeters, which is a very thick layer. That's why they used penoplex.

OUR RESULTS

The client received the coating necessary for his production tasks in the shortest possible time and of proper quality. He was satisfied. Note that this is not our first or even our second experience with this customer. We look forward to fruitful cooperation in the future.

Stages of implementation engineering design of the floor

engineering design of the floor
1.jpg
2.jpg
3.jpg
4.jpg
5.jpg
6.jpg
7.jpg
8.jpg
9.jpg
10.jpg
11.jpg
12.jpg
13.jpg
14.jpg
15.jpg
16.jpg

The result of floor engineeringDELIVERED ON TIME, STANDARD, TECHNOLOGICAL INDUSTRIAL FLOORS AT THE FACILITY LLC "Conversion-XXI"

SEE THE RESULT OF OUR WORK
result-konversija-xxi-03-2022.jpg

READ REVIEWS OUR SATISFIED CUSTOMERS

Reviews that we managed to collect between production cycles at our facilities

ReviewsABOUT THE PROFTEHPOL PROJECT

We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.

We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.

Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.

Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.

Our clients Which we are proud of

for which we have made good floors
Legal informationSociety Limited Liability "PROFTECHENGINEERING" Shareholdt International consumer society "GOLDEN AXIS"TIN 9709064635CHECKPOINT 770901001OGRN 1207700295406Legal address:109147, Moscow, B.Andronevskaya str., 23, building 1, floor 8, room 4, office of PROFTEHPOL company
POSTAL DETAILSActual address:109147, Moscow, B.Andronevskaya str., 23, building 1, floor 8, room 4, office of PROFTEHPOL companyPhone number for details:8 800 550 90 72E-mail:info@proftechpol.ru
Financial detailsCurrent account: 40702810870010234730MOSCOW BRANCH OF JSC CB "MODULBANK" MoscowBIC 044525092Correspondent account 30101810645250000092CEO of Nazyrov Anton