Portfolio
Floor for Komus warehouse in Kolomna

INDUSTRIAL FLOOR FOR KOMUS WAREHOUSE IN KOLOMNA

WE HAVE SAVED FOR THE CLIENT 100 207 ₽

6%Economy

FLOOR ENGINEERING CONSTRUCTION Floor for Komus warehouse in Kolomna

MO, Kolomna, Oksky ave., 40

Characteristics and description
Company name LLC "Himpol"
The purpose of the floor and the room itself Floor for Komus warehouse in Kolomna
Type of floor topping floors
Thickness of the concrete layer 80 cm
Room area 852 sq. m.

Customer needs AND THE OPTIMAL ENGINEERING SOLUTION

factors taken into account when developing the floor design

WHAT TECHNOLOGY WAS CHOSEN

The customer turned to us with a ready-made work plan and the necessary floor structure: it was necessary to strengthen the concrete floor slab with a thickness of 80 mm; to implement a dust-free topping coating; to separate the floor slab from the walls and frame it with a metal corner around the perimeter; to carry out work in stages with the movement of equipment. We just had to get down to business and faithfully complete the task.

The following aspects are important to the customer:

Terms of work

Number of days for all work: 10

Requirements for the quality of work

Floors must comply with SNiP 2.03. 13-88

Appearance of floors

Must look presentable

Durability

Service life of floors without repair (years): 10

Total cost

Budget within the framework of: 1 700 000 ₽

Floor for Komus warehouse in Kolomna: The object before the start of work — The object before the start of work

Floor arrangement ACCORDING TO THE ENGINEERING SOLUTION FOR THE OBJECT: LLC "Himpol"

how we implemented this floor design

DIFFICULTIES IN THE PROCESS OF WORK AT THIS FACILITY

Since this facility is an operating production facility, the work had to be carried out on weekends. Accordingly, at each stage of the process, special control on our part was required. Otherwise, the work would have to be completed on weekdays, which would negatively affect the customer's production plans.

THE RESULTS OF OUR WORK

Each stage was completed on time, the client received a high-quality concrete floor with a reinforcing top layer and a metal corner around the perimeter. Due to the fact that we picked up a more budget-friendly material, which at the same time met all technical conditions, we saved 100,207 rubles.

Look at the finished floor, which was obtained as a result of our work.

Stages of implementation engineering design of the floor

engineering design of the floor

The process of laying the reinforcement mesh has been completed

Raised the reinforcing mesh on the support clamps ("chairs")

The result of floor engineeringDELIVERED ON TIME, STANDARD, TECHNOLOGICAL INDUSTRIAL FLOORS AT THE FACILITY LLC "Himpol"

SEE THE RESULT OF OUR WORK

READ REVIEWS OUR SATISFIED CUSTOMERS

Reviews that we managed to collect between production cycles at our facilities

ReviewsABOUT THE PROFTEHPOL PROJECT

We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.

We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.

Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.

Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.

Our clients Which we are proud of

for which we have made good floors