Our engineering in action
On the example of the floor arrangement for the largest transport and logistics center of Belarus "Prilesye"

TOPPING FLOOR FOR A COMPLEX OF BUILDINGS IN SHCHELKOVO

WE HAVE SAVED FOR THE CLIENT 581 200
8%Economy
Floor for the complex of industrial buildings of PJSC"Arsenal Rost", MO Shchelkovo

FLOOR ENGINEERING CONSTRUCTION Floor for the complex of industrial buildings of PJSC"Arsenal Rost", MO Shchelkovo

MO, Shchelkovo, Zarechnaya str., p. 109, room 1
Characteristics and description
Company name
Arsenal Growth CJSC
The purpose of the floor and the room itself
Floor for the complex of industrial buildings of PJSC"Arsenal Rost", MO Shchelkovo
Type of floor
topping floors
Thickness of the concrete layer
200 cm
Room area
1924.4 sq. m.

Customer needs AND THE OPTIMAL ENGINEERING SOLUTION

factors taken into account when developing the floor design

FOUND OUT THE CUSTOMER'S NEEDS

The Arsenal Growth company, as a regular customer, turned to us for the third time and again - with the task of installing concrete floors with a hardener on a large area.

The following aspects are important to the customer:

Terms of work
Number of days for all work: 60
Requirements for the quality of work
Floors must comply with SNiP 2.03. 13-88
Appearance of floors
Must look presentable
Durability
Service life of floors without repair (years): 20
Total cost
Budget within the framework of: 6 911 000 ₽
Floor for the complex of industrial buildings of PJSC"Arsenal Rost", MO Shchelkovo: The object before the start of work
The object before the start of work

Floor arrangement ACCORDING TO THE ENGINEERING SOLUTION FOR THE OBJECT: Arsenal Growth CJSC

how we implemented this floor design

WE HAVE FOUND AN ECONOMICAL SOLUTION FOR THE INSTALLATION OF THE FLOOR FOR THE WAREHOUSE

After the inspection of the premises, our specialist sent all the data on the old coating to our technical department. Based on these data, we proposed a technology using steel fiber instead of a structure using reinforcement mesh. Steel fiber, unlike reinforcing mesh, is an order of magnitude cheaper, since it does not take a long time to knit and install on supports. Also, it is not inferior in the final strength of the concrete floor, and in some respects even better.

ADVANTAGES OF STEEL-FIBER CONCRETE TECHNOLOGY

  1. Increases the strength of concrete for bending, compression and splitting up to 35%.
  2. Increases impact and fatigue strength over 500%.
  3. Prevents delamination of concrete mix up to 25%.
  4. Reduces the time of primary and final hardening by up to 50%.
  5. Reduces the risk of chipping corners and edges up to 90%.

A DEVICE FOR A WAREHOUSE IN SHCHELKOVO

According to our technical program, we divided the entire object into 6 maps and positively filled each of them. At the same time, the customer carried out constant monitoring, since he had already "burned himself" on a substandard field. But after pouring several of them, he, seeing our professionalism, calmed down and trusted our foreman and how he controls the process.

THE RESULT OF OUR WORK

As a result, we filled in the facility on time and received an industrial floor for a warehouse of excellent quality, all according to our technical program written by our chief engineer.

The stages of the floor arrangement and the final result are shown in the photo below.

Stages of implementation engineering design of the floor

engineering design of the floor
1.jpg
Preparation for the floor arrangement
2.jpg
Installation of guiding beacons
3.jpg
Installation of an insulating seam
4.jpg
Wall protection with wall film
5.jpg
Preparation for concrete floor acceptance
6.jpg
Installation of concrete guides
7.jpg
Filling of polypropylene fiber
8.jpg
Acceptance of concrete mix
9.jpg
Acceptance of concrete mix
10.jpg
Screed concrete with a seven-meter rule
11.jpg
Filling concrete with topping
12.jpg
General view of the concrete slab
13.jpg
Finished concrete slab
14.jpg
Cutting of shrinkage seams
15.jpg
Completion of work on the device of shrinkage joints
16.jpg
Sealing of shrinkage joints

The result of floor engineeringDELIVERED ON TIME, STANDARD, TECHNOLOGICAL INDUSTRIAL FLOORS AT THE FACILITY Arsenal Growth CJSC

SEE THE RESULT OF OUR WORK
result-shelkovo-arsenal.jpg

READ REVIEWS OUR SATISFIED CUSTOMERS

Reviews that we managed to collect between production cycles at our facilities

ReviewsABOUT THE PROFTEHPOL PROJECT

We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.

We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.

Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.

Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.

Our clients Which we are proud of

for which we have made good floors
Legal informationSociety Limited Liability "PROFTECHENGINEERING" Shareholdt International consumer society "GOLDEN AXIS"TIN 9709064635CHECKPOINT 770901001OGRN 1207700295406Legal address:109147, Moscow, B.Andronevskaya str., 23, building 1, floor 8, room 4, office of PROFTEHPOL company
POSTAL DETAILSActual address:109147, Moscow, B.Andronevskaya str., 23, building 1, floor 8, room 4, office of PROFTEHPOL companyPhone number for details:8 800 550 90 72E-mail:info@proftechpol.ru
Financial detailsCurrent account: 40702810870010234730MOSCOW BRANCH OF JSC CB "MODULBANK" MoscowBIC 044525092Correspondent account 30101810645250000092CEO of Nazyrov Anton