| Characteristics and description |
|---|
Company name LLC "Electrontest" |
The purpose of the floor and the room itself Floor for the laboratory of LLC "Electrontest", Khovrino |
Type of floor topping floors |
Thickness of the concrete layer 90 cm |
Room area 350 m² |
This facility was planned as a testing laboratory, a flat antistatic floor was needed, conforming to building regulations. Additionally, the client asked to make an entrance platform and a ramp, which was supposed to be 300 mm higher than the floor.
The following aspects are important to the customer:
Terms of work Number of days for all work: 5 |
Requirements for the quality of work Floors must comply with SNiP 2.03. 13-88 |
Appearance of floors Must look presentable |
Durability Service life of floors without repair (years): 12 |
Total cost Budget within the framework of: 700 000 ₽ |
The client was offered a standard technology with the use of polypropylene fiber and reinforced with a reinforcing mesh in the places of the passage of the partition.
Fibro-concrete floor technology, unlike reinforced with reinforcement, has several advantages. A single armature works only for the bottom or only for the top, and a double one will be a strong blow to the budget. The fiber works all over the base and in some respects even surpasses the reinforcing mesh, namely:
The technology we have proposed has reduced the cost by 25.9%, because steel fiber is cheaper than rebar. It significantly reduces the production time, because it does not need to be reinforced with a reinforcing mesh. At the same time, concrete is already supplied with fiber.
After agreeing on all stages of work, the filling of the first part of the room began. We note that the original base of the floor was curved, in places the differences reached up to 50 mm. Despite all the difficulties, the object was commissioned as quickly as possible.
Upon completion of the work, the client received a discount and a high-quality coating for the testing laboratory, which complies with building regulations and will last at least 10 years.
We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.
We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.
Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.
Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.