Portfolio
Floor for the warehouse of LLC "AST-Plast", MO, Protvino

INDUSTRIAL FLOOR FOR A WAREHOUSE IN PROTVINO

WE HAVE SAVED FOR THE CLIENT 428 565 ₽

20%Economy

FLOOR ENGINEERING CONSTRUCTION Floor for the warehouse of LLC "AST-Plast", MO, Protvino

MO, Protvino, Kremenkovskoe sh., 2

Characteristics and description
Company name AST-Plast LLC
The purpose of the floor and the room itself Floor for the warehouse of LLC "AST-Plast", MO, Protvino
Type of floor topping floors
Thickness of the concrete layer 150 cm
Room area 960 m²

Customer needs AND THE OPTIMAL ENGINEERING SOLUTION

factors taken into account when developing the floor design

IDENTIFIED THE MAIN NEEDS OF THE CLIENT

The client turned to us with the task of making a concrete floor with topping for a large warehouse with an area of almost 1000 m2. At this facility, it was planned to install several machines weighing 1.5-3 tons, as well as the movement of cars. Accordingly, the strength of the finished floor had to correspond to these loads, and the coating had to have high wear resistance. Initially, the customer considered the option of hardening due to double reinforcement. We carefully studied the object, its features and the needs of the client, and then chose the best solution – a concrete floor with steel fiber.

The following aspects were important to the customer:

Terms of work

Number of days for all work: 8

Requirements for the quality of work

Floors must comply with SNiP 2.03. 13-88

Appearance of floors

Must look presentable

Durability

Service life of floors without repair (years): 10

Total cost

Budget within the framework of: 2 150 000 ₽

Floor for the warehouse of LLC "AST-Plast", MO, Protvino: The object before the start of work — The object before the start of work

Floor arrangement ACCORDING TO THE ENGINEERING SOLUTION FOR THE OBJECT: AST-Plast LLC

how we implemented this floor design

DIFFICULTIES IN THE INSTALLATION OF THE FLOOR AT THIS FACILITY

First of all, it was necessary to eliminate the irregularities of the base in order to minimize the differences in the thickness of the floor slab when pouring. Also, the deadlines were "pressed" – in 8 days it was necessary to carry out the entire volume of the technological process. The work was carried out continuously – both day and night.

THE RESULTS OF OUR WORK

Our further cooperation with AST-Plast depended on the quality of work performed at this facility. We have coped with the task and now we are fully counting on the next front of work. Thanks to the choice of a more economical technology, 428,565 rubles were saved for the client.

See below the photos of the stages of our work.

Stages of implementation engineering design of the floor

engineering design of the floor

The waterproofing tape is laid. The concrete pump has arrived

The second stage of concrete mix acceptance

We process concrete with a grout machine

Concrete surface treatment with a grout machine

The result of floor engineeringDELIVERED ON TIME, STANDARD, TECHNOLOGICAL INDUSTRIAL FLOORS AT THE FACILITY AST-Plast LLC

SEE THE RESULT OF OUR WORK

READ REVIEWS OUR SATISFIED CUSTOMERS

Reviews that we managed to collect between production cycles at our facilities

ReviewsABOUT THE PROFTEHPOL PROJECT

We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.

We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.

Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.

Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.

Our clients Which we are proud of

for which we have made good floors