| Characteristics and description |
|---|
Company name LLC "Healthy water" |
The purpose of the floor and the room itself Floor for the warehouse of LLC "Healthy water", Moscow |
Type of floor topping floors |
Thickness of the concrete layer 100 cm |
Room area 865 sq. m. |
This room was planned as a warehouse with the use of forklifts up to 2.5 tons on rubber wheels. Accordingly, the future floor must comply with SNIP 2.03. 13-88, a flat surface with an error of no more than 4 mm and withstand loads of 3 tons.
The following aspects are important to the customer:
Terms of work Number of days for all work: 7 |
Requirements for the quality of work Floors must comply with SNiP 2.03. 13-88 |
Appearance of floors Must look presentable |
Durability Service life of floors without repair (years): 12 |
Total cost Budget within the framework of: 1 500 000 ₽ |
Having received the consent from the client to conduct a technical assessment, our specialist made all the necessary measurements at the facility and sent it to the technical department of PROFTEHPOL for confirmation.
Based on the data obtained, the chief engineer provided the client with an economical solution for his project, a concrete floor with a 100 mm thick hardener and additionally reinforced with construction micro-reinforcing fiber.
This technology with the use of polypropylene fiber at maximum loads of about 5 tons is ideal both for operation, as it is distributed over the entire thickness of the concrete mixture, and for budget savings, since it excludes a number of works and materials, such as the purchase of reinforcement, binding of reinforcement mesh, purchase of a holder support for reinforcement mesh, and so on.
Thanks to this, we managed to reduce the cost of the project by 27% and save the customer 310,300 rubles.
After signing the contracts and shaking hands, we got to work. We note that the object is typical, of the difficulties we encountered only with sub-zero temperatures at the entrance to the warehouse, where, according to the project, we arranged a large ramp. To solve this problem, we have created a greenhouse at the entrance.
In general, there were no special difficulties at this facility, we successfully passed the facility. The client received a high-quality concrete coating for his needs.
The stages of the floor arrangement and the final result are shown in the photo below.
We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.
We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.
Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.
Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.