| Characteristics and description |
|---|
Company name LLC "IRON" |
The purpose of the floor and the room itself Floor for the warehouse of LLC "IRON", Moscow |
Type of floor topping floors |
Thickness of the concrete layer 100 cm |
Room area 434 sq. m. |
The object was planned for a warehouse of cosmetic products, respectively, the floor loads were expected to be small. Mainly from dynamic loads there had to be people and small loaders on a soft course.
Static loads were assumed to be standard: racks, pallets, etc. Among the features, we note that there were many columns and junctions that required additional attention when organizing work.
The following aspects are important to the customer:
Terms of work Number of days for all work: 7 |
Requirements for the quality of work Floors must comply with SNiP 2.03. 13-88 |
Appearance of floors Must look presentable |
Durability Service life of floors without repair (years): 12 |
Total cost Budget within the framework of: 700 000 ₽ |
Taking into account all the planned loads and the classification of the warehouse, we proposed a technology using polypropylene fiber instead of the outdated, but already popular method of installing a floor with a reinforcing mesh.
Why? Unlike the mesh, which lies in the lower plane of the floor slab, fiber reinforces concrete for the entire thickness of the slab. Thousands of polypropylene fiber fibers are randomly distributed in concrete and intercept microcracks. Thereby significantly reducing the risk of cracks and their spreading.
Also, unlike building fiber, reinforcement mesh needs to be knitted and installed on supports, or, as we call it in our circles, "chairs" for reinforcement. In this regard, financial costs are reduced, and the work goes faster.
The work on the facility went off with a bang. Completion dates were important to the client, and we completed production in just a few days. The results of the device of the client's floor were pleasantly surprised. We note that this is the second request of the client to our company. We managed to optimize an economical floor solution for the warehouse by reducing the time of work, thereby giving the client the opportunity to save a considerable amount without compromising quality.
The stages of the floor arrangement and the final result are shown in the photo below.
We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.
We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.
Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.
Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.