| Characteristics and description |
|---|
Company name OLYMP-CITY LLC |
The purpose of the floor and the room itself Floor for the warehouse of LLC "OLYMP-CITY", MO Dzerzhinsky |
Type of floor topping floors |
Thickness of the concrete layer 150 cm |
Room area 850 sq. m. |
The facility was planned as a warehouse for industrial purposes. According to the project, this is a two-storey production building, the client planned to equip a warehouse on the first floor, and arrange the second as a production room. A flat, dust-free concrete floor was required. The room was new, the base consisted of sand and rubble with height differences up to half a meter.
The following aspects are important to the customer:
Terms of work Number of days for all work: 9 |
Requirements for the quality of work Floors must comply with SNiP 2.03. 13-88 |
Appearance of floors Must look presentable |
Durability Service life of floors without repair (years): 16 |
Total cost Budget within the framework of: 1 500 000 ₽ |
At this facility, the floor was filled in according to the technical solution of the customer. The loads were planned to be up to 5 tons using a forklift truck. On the second floor there was an overlap with a metal profiled sheet, so it was decided to apply the technology using a double reinforcement mesh.
Fiber-reinforced concrete technology for this object is not suitable in design, since the ceiling would collapse without a metal frame.
The work was carried out in the spring. Due to the favorable geographical location, the supply of concrete mix was carried out smoothly, which allowed us to complete the floor installation 2 days earlier.
On the ground floor, in some places, the height differences reached 50 centimeters. Access to the second floor was either by a narrow staircase or through an elevator opening. A two-rotor grout machine weighing about 600 kilograms was needed for the area of the second floor with an area of 600 m2.
To solve this problem, we additionally ordered a winch for the object, but since there was no reason to screw the winch with bolts, we decided to weld it to a metal beam. As a result, we successfully lifted the heavy tool to the second floor.
Despite the difficulties of the first floor with a crooked base and the problem of equipment delivery, the work was done efficiently and delivered on time. The client received a ready-to-use warehouse for production purposes.
The stages of the floor arrangement and the final result are shown in the photo below.
We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.
We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.
Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.
Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.