| Characteristics and description |
|---|
Company name Plastprofil LLC |
The purpose of the floor and the room itself Floor for the warehouse of LLC "Plastprofil", MO, Shchelkovo |
Type of floor topping floors |
Thickness of the concrete layer 100 cm |
Room area 888 sq. m. |
The client set a task – to equip a concrete floor with a hardener on the 2nd floor of an industrial building. The space in which the work was required consisted of two rooms - a large room and a corridor.
The following aspects are important to the customer:
Terms of work Number of days for all work: 60 |
Requirements for the quality of work Floors must comply with SNiP 2.03. 13-88 |
Appearance of floors Must look presentable |
Durability Service life of floors without repair (years): 20 |
Total cost Budget within the framework of: 1 244 000 ₽ |
There was only one exit in the large room – it was, accordingly, the entrance to this room. Therefore, in order to get the workers inside and start processing, putting the material there, the workers performed the following procedure: first they filled half of the room from the gate to the far point, then turned around and filled the letter "P" with the second half from the far point to the exit – to the gate.
For two fills, the floor was made first in the room, and then in the corridor. The client had no complaints about the finished object. Due to the completion of work at this warehouse, the number of completed objects by PROFTEHPOL increased to 5. And we are determined to continue and continue further.
The stages of the floor arrangement and the result of the work are shown in the photo below.
We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.
We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.
Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.
Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.