| Characteristics and description |
|---|
Company name Agrotrans LLC |
The purpose of the floor and the room itself Floors for car wash LLC "Agrotrans", Bronnitsy |
Type of floor topping floors |
Thickness of the concrete layer 120 cm |
Room area 144 sq. m. |
The object was planned for a car wash, a concrete floor was needed, resistant to liquids, and without dust, with slopes into the drainage tray. The work was carried out in the warm season, which contributed to a quick delivery.
The following aspects are important to the customer:
Terms of work Number of days for all work: 7 |
Requirements for the quality of work Floors must comply with SNiP 2.03. 13-88 |
Appearance of floors Must look presentable |
Durability Service life of floors without repair (years): 10 |
Total cost Budget within the framework of: 980 000 ₽ |
Since it was necessary to have a coating resistant to liquids, the client offered a polymer coating for his room. But after examining the sink by a specialist, we made an economical decision and offered a concrete floor with topping, covered with a special protective varnish that is resistant to any liquids and is ideal for use in a car wash.
The old base of this object had drops of up to 60 mm and consisted of a dusty concrete screed. The geographical location of the object was not very convenient, the nearest concrete plant was located thirty minutes from the object. The slopes into the drainage tray were carried out using the technology of liquid beacons, it differs from the guiding beacons only by the complexity of the work. Despite the difficulties, we filled in the object in one evening, and in the morning the coating was almost ready.
The object was successfully completed in June 2018, the client received a high-quality floor that does not dust, has slopes in the drainage and will serve the customer for at least 10 years.
The stages of the floor arrangement and the final result are shown in the photo below.
We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.
We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.
Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.
Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.