Portfolio
Hardened concrete floor for the warehouse in Podols

HARDENED CONCRETE FLOOR FOR THE WAREHOUSE IN PODOLSK

WE HAVE SAVED FOR THE CLIENT 179 500 ₽

20%Economy

FLOOR ENGINEERING CONSTRUCTION Hardened concrete floor for the warehouse in Podols

Moscow Region, Podolsk City, Komsomolskaya Street, 1, Building 21

Characteristics and description
Company name KS Engineering LLC
The purpose of the floor and the room itself Hardened concrete floor for the warehouse in Podols
Type of floor topping floors
Thickness of the concrete layer 13 cm
Room area 118.3 m²

Customer needs AND THE OPTIMAL ENGINEERING SOLUTION

factors taken into account when developing the floor design

WE HAVE SELECTED THE OPTIMAL ENGINEERING SOLUTION

For the warehouse on the ground floor, it was necessary to carry out work on the installation of a concrete floor. As in all other cases, when a customer contacts our company, the first step is to conduct a detailed survey of the facility. All the data obtained during the call and subsequent visit to the warehouse itself were transferred to the design department.

This division prepared the optimal solution – a concrete floor with an average thickness of 13 cm with a strengthening top layer, reinforced with plastic fiber over the entire area; in several places with pits it was necessary to prepare a sand base and additionally strengthen them with a reinforcement frame.

Terms of work

Number of days for all work: 33

Requirements for the quality of work

Floors must comply with SNiP 2.03. 13-88

Appearance of floors

Must look presentable

Durability

Service life of floors without repair (years): 10

Total cost

Budget within the framework of: 897 700 ₽

Hardened concrete floor for the warehouse in Podols: The object before the start of work — The object before the start of work

Floor arrangement ACCORDING TO THE ENGINEERING SOLUTION FOR THE OBJECT: KS Engineering LLC

how we implemented this floor design

FEATURES OF WORKS

The places with the pits the customer himself cleared of debris, and we already filled them with sand and compacted. We did not use a vibrating plate, as you can not really drive it around on such a small area. Used a wooden plank and hit it with a hammer.

The main difficulty at the pouring stage was that many other organizations were located on the site. The whole quest was to determine a specific date and time for work.

The area behind the parking lot was chosen as a place to wash the mixers and drain the remaining concrete. It was not possible to carry out the work during working hours due to the parked cars.

There was an option to schedule the pouring in the evening, but the concrete plant was not eager to work overtime due to the small volume of concrete. In the end, we found a compromise: the concrete was laid between 17 and 18 hours, when some of the cars were already leaving the parking lot.

OUR RESULTS

The customer was satisfied with the final product. For our company, this project became the fifth in Podolsk, and there is a strong feeling that still not everywhere in this city has good industrial floors.

Stages of implementation engineering design of the floor

engineering design of the floor

The walls have been covered with a film; the insulation seam has been prepared

The route has been laid; the asphalt has been covered with film

Laying the concrete mixture from the second mixer

After troweling and applying the curing membrane

The outer part of the damper tape have been cut off

The result of floor engineeringDELIVERED ON TIME, STANDARD, TECHNOLOGICAL INDUSTRIAL FLOORS AT THE FACILITY KS Engineering LLC

SEE THE RESULT OF OUR WORK

READ REVIEWS OUR SATISFIED CUSTOMERS

Reviews that we managed to collect between production cycles at our facilities

ReviewsABOUT THE PROFTEHPOL PROJECT

We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.

We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.

Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.

Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.

Our clients Which we are proud of

for which we have made good floors