| Characteristics and description |
|---|
Company name Agroholding Stolitsa LLC |
The purpose of the floor and the room itself Highly filled polymer coating for a bakery in Dzerzhinsky |
Type of floor polymer floors |
Thickness of the polymer coating 8 mm |
Room area 96.28 m² |
The client turned to us with the task of making a coating on the bakery that has good chemical and thermal resistance. The following technical solution was selected – a filled polymer coating based on synthetic resins and mineral fillers with an average thickness of 8 mm.
Terms of work Number of days for all work: 5 |
Requirements for the quality of work Floors must comply with SNiP 2.03. 13-88 |
Appearance of floors Must look presentable |
Durability Service life of floors without repair (years): 10 |
Total cost Budget within the framework of: 1 037 100 ₽ |
During the work, it turned out that there was not enough primer – apparently, the concrete base absorbed more than expected. I had to re-order the material. The rest of the work went smoothly.
The client received a nice polymer coating of red color for his bakery, which will withstand chemical and temperature loads. He also said that he plans to give us another small room to work on the same facility. We are waiting!
We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.
We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.
Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.
Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.