Portfolio
Industrial floor for a warehouse in Balashikha for Krypton LLC

CONCRETE FLOOR WITH TOPPING IN BALASHIKHA FOR KRYPTON LLC

WE HAVE SAVED FOR THE CLIENT 137 900 ₽

20%Economy

FLOOR ENGINEERING CONSTRUCTION Industrial floor for a warehouse in Balashikha for Krypton LLC

MO, Balashikha, MKR Severny, vl. 57 v

Characteristics and description
Company name KRYPTON LLC
The purpose of the floor and the room itself Industrial floor for a warehouse in Balashikha for Krypton LLC
Type of floor topping floors
Thickness of the concrete layer 100 cm
Room area 278 m²

Customer needs AND THE OPTIMAL ENGINEERING SOLUTION

factors taken into account when developing the floor design

FOUND OUT THE NEEDS OF THE CLIENT

The Krypton company has already asked us for help with the arrangement of the industrial floor for the second time. Again, the object was a warehouse, the actual base of which is asphalt, and rubble under it. A clear task was set – to make a concrete floor with a reinforcing top layer. The requirements for the final coverage were as follows: it must be smooth, durable, resistant to abrasion; it must withstand dynamic loads from a loader, Gazelle, rohli, as well as static loads of 2-3 tons.

The following aspects are important to the customer:

Terms of work

Number of days for all work: 5

Requirements for the quality of work

Floors must comply with SNiP 2.03. 13-88

Appearance of floors

Must look presentable

Durability

Service life of floors without repair (years): 20

Total cost

Budget within the framework of: 690 000 ₽

Industrial floor for a warehouse in Balashikha for Krypton LLC: The object before the start of work — The object before the start of work

Floor arrangement ACCORDING TO THE ENGINEERING SOLUTION FOR THE OBJECT: KRYPTON LLC

how we implemented this floor design

DIFFICULTIES DURING WORK

The work was carried out when the temperature was still below zero. Heating was organized inside the room, a greenhouse was also made – you can see it below in one of the photos of the stages of work.

In the course of the work, an increase in the volume of concrete was agreed with the customer in comparison with the calculated one, since the site for pouring had a slope to the right side.

There was another factor that slightly complicated the production process – the location of the object itself. It was difficult to get to him.

OUR RESULTS

We completed each stage of the work quickly and accurately. The client was satisfied. We hope that we will make more than one floor for the KRYPTON company in the future. By the way, for us this object has already become the sixth in Balashikha. This is our record figure among all the cities of the Moscow region in which we worked. The closest pursuer is Mytishchi with a result of 5 objects.

Stages of implementation engineering design of the floor

engineering design of the floor

We are preparing to receive the concrete mixture

An additional concrete pump is approaching

Moisture-retaining impregnation is applied

The result of floor engineeringDELIVERED ON TIME, STANDARD, TECHNOLOGICAL INDUSTRIAL FLOORS AT THE FACILITY KRYPTON LLC

SEE THE RESULT OF OUR WORK

READ REVIEWS OUR SATISFIED CUSTOMERS

Reviews that we managed to collect between production cycles at our facilities

ReviewsABOUT THE PROFTEHPOL PROJECT

We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.

We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.

Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.

Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.

Our clients Which we are proud of

for which we have made good floors