| Characteristics and description |
|---|
Company name Prof21 LLC |
The purpose of the floor and the room itself Industrial floor for the office of Prof21 LLC, Moscow |
Type of floor topping floors |
Thickness of the concrete layer 80 cm |
Room area 807 m² |
The customer needed to get into the loft style for his office premises, the task was to hand over the object in the shortest possible time in order to proceed to the second stage of work.
The following aspects are important to the customer:
Terms of work Number of days for all work: 7 |
Requirements for the quality of work Floors must comply with SNiP 2.03. 13-88 |
Appearance of floors Must look presentable |
Durability Service life of floors without repair (years): 12 |
Total cost Budget within the framework of: 980 000 ₽ |
Initially, the client had a standard concrete floor reinforced with a double reinforcement mesh in the design solution. After the measurements of a specialist and a detailed survey of the client, we decided to offer the client a technology using polypropylene fiber, which is great for office space.
Fibro-concrete floor technology, in contrast to reinforced with reinforcement, has a number of advantages. A single armature works only for the bottom or only for the top, a double one will be a good blow to the wallet. Fiber works all over the base and in some respects surpasses the reinforcing mesh, namely:
The technology we have proposed has reduced the cost by 22.9%, because polypropylene fiber is cheaper than rebar. It significantly reduces the production time, because it does not need to be reinforced with a reinforcing mesh. At the same time, concrete is already supplied with fiber.
After the delivery of equipment and materials to the facility, we started work on the same day. The work was carried out in winter, which, in turn, contributed to the long hardening of the concrete mixture.
An additional complication was the thin concrete screed of the site up to 5 cm thick, since with such a thickness it is difficult to introduce a hardener. In addition, there were many columns, abutments and jewelry work with a concrete pump was carried out at the facility. And in some places, laying was carried out.
When handing over the object, the customer had no complaints, the concrete coating turned out to be of high quality and perfectly fit into the loft style.
The stages of the floor arrangement and the final result are shown in the photo below.
We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.
We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.
Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.
Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.