| Characteristics and description |
|---|
Company name LLC "Conversion-XXI" |
The purpose of the floor and the room itself Self-leveling self-leveling polyurethane coating for the workshop of LLC "Conversion-XXI" |
Type of floor polymer floors |
Thickness of the polymer coating 2 mm |
Room area 220 sq. m. |
The general contractor, with whom we have previously worked, asked us to help make a high-quality polymer floor and correct a number of shortcomings that he made when installing the coating. We were only required to do the work – we didn't even have to develop the design, because a design solution was already provided with specific materials and a specific supplier.
The following aspects are important to the customer:
Terms of work Number of days for all work: 7 |
Requirements for the quality of work Floors must comply with SNiP 2.03. 13-88 |
Appearance of floors Must look presentable |
Durability Service life of floors without repair (years): 20 |
Total cost Budget within the framework of: 596 000 ₽ |
Before the start of our work, the condition of the floor was in a suboptimal condition, so the first stage was that we sanded the old layer and re-applied the polymer coating. It is worth adding that the foundation, which was also made before us, turned out to be, to put it mildly, imperfect. Therefore, we implemented this solution – we applied a layer of matte varnish to remove the glare that appears on uneven glossy polymer substrates.
Another obstacle during the work was the fact that this facility is of a closed type, only citizens of the Russian Federation could get to it. This factor somewhat complicated the selection of professional personnel, but our company has them, so we coped.
Thanks to the actions of our workers, the client eventually received a standard self-leveling polymer floor of two millimeter thickness. The transformation of the coating from unsightly to attractive was to the customer's liking.
We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.
We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.
Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.
Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.