| Characteristics and description |
|---|
Company name LLC "Agency Colors" |
The purpose of the floor and the room itself Painting polymer coating for the printing shop of LLC "Agency Colors", Moscow |
Type of floor polymer floors |
Thickness of the polymer coating 0.03 mm |
Room area 420.5 sq. m. |
The client is the owner of an advertising agency. Since the room in which the work on the arrangement of the floors had to be done was rented, the customer named one need – to make a dust-free foundation. According to the results of the technical evaluation, a standard epoxy coating was chosen.
The following aspects were important to the customer:
Terms of work Number of days for all work: 11 |
Requirements for the quality of work Floors must comply with SNiP 2.03. 13-88 |
Appearance of floors Must look presentable |
Durability Service life of floors without repair (years): 10 |
Total cost Budget within the framework of: 418 000 ₽ |
Before the work began, there was an old linoleum on the floor. When the client removed it, there was a cement-sand screed under it, which is not the best base for epoxy and polymer coatings in general due to porosity and low brand strength. The coating had cracks. It was necessary to carry out repair work, apply a primer and the first coat of paint in a special way for better impregnation and strengthening.
The client received a polymer paint coating for the printing shop on time. The savings amounted to 62,624 rubles.
See below the photos of the stages of our work.
We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.
We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.
Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.
Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.