Our engineering in action
On the example of the floor arrangement for the largest transport and logistics center of Belarus "Prilesye"

PAINT POLYMER COATING AT THE CLOTHING WAREHOUSE IN THE SOUTH-EAST OF MOSCOW

WE HAVE SAVED FOR THE CLIENT 608 100
15%Economy
Polymer paint coating at the clothing warehouse in the south-east of Moscow

FLOOR ENGINEERING CONSTRUCTION Polymer paint coating at the clothing warehouse in the south-east of Moscow

Moscow, Kuryanovskaya Embankment, 6, p. 1
Characteristics and description
Company name
LLC "EQUIPCENTER"
The purpose of the floor and the room itself
Polymer paint coating at the clothing warehouse in the south-east of Moscow
Type of floor
polymer floors
Thickness of the polymer coating
1.5 mm
Room area
1620 m²

Customer needs AND THE OPTIMAL ENGINEERING SOLUTION

factors taken into account when developing the floor design

WE HAVE SELECTED THE OPTIMAL ENGINEERING SOLUTION

The customer was the tenant of the premises, which he was preparing for a clothing warehouse. At the stage of preliminary technical assessment, we found out that the following loads are expected: racks with goods and loaders weighing up to 3 tons.

The client called the main requirement for the new floor resistance to moisture, dust, abrasion. Based on all the received technical data about the room and the customer's wishes, our chief designer selected such a technical solution – a polymer coating with a base layer.

Terms of work
Number of days for all work: 15
Requirements for the quality of work
Floors must comply with SNiP 2.03. 13-88
Appearance of floors
Must look presentable
Durability
Service life of floors without repair (years): 10
Total cost
Budget within the framework of: 4 054 300 ₽
Polymer paint coating at the clothing warehouse in the south-east of Moscow: The object before the start of work
The object before the start of work

Floor arrangement ACCORDING TO THE ENGINEERING SOLUTION FOR THE OBJECT: LLC "EQUIPCENTER"

how we implemented this floor design

FEATURES OF THE WORK

After signing the contract, we waited several days before the previous tenants handed over the premises to the client.

The work itself was carried out without any difficulties. The only point is that the polishing took a little longer than planned. Nevertheless, the entire production cycle was completed on time.

OUR RESULTS

The customer can now further equip the clothing warehouse in the rented premises and subsequently operate it without having any problems with the floors.

Stages of implementation engineering design of the floor

engineering design of the floor
1.jpg
Started grinding
2.jpg
The sanding is finished, vacuumed; repairs are being made
3.jpg
Priming
4.jpg
Applying the first layer of putty
5.jpg
The second layer of putty was applied
6.jpg
After applying two layers of putty and sanding, vacuum the surface
7.jpg
The primer polymer-cement coating was applied
8.jpg
Applying the sealing paint coating

The result of floor engineeringDELIVERED ON TIME, STANDARD, TECHNOLOGICAL INDUSTRIAL FLOORS AT THE FACILITY LLC "EQUIPCENTER"

SEE THE RESULT OF OUR WORK
result-ekipcentr-moskva.jpg

READ REVIEWS OUR SATISFIED CUSTOMERS

Reviews that we managed to collect between production cycles at our facilities

ReviewsABOUT THE PROFTEHPOL PROJECT

We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.

We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.

Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.

Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.

Our clients Which we are proud of

for which we have made good floors
Legal informationSociety Limited Liability "PROFTECHENGINEERING" Shareholdt International consumer society "GOLDEN AXIS"TIN 9709064635CHECKPOINT 770901001OGRN 1207700295406Legal address:109147, Moscow, B.Andronevskaya str., 23, building 1, floor 8, room 4, office of PROFTEHPOL company
POSTAL DETAILSActual address:109147, Moscow, B.Andronevskaya str., 23, building 1, floor 8, room 4, office of PROFTEHPOL companyPhone number for details:8 800 550 90 72E-mail:info@proftechpol.ru
Financial detailsCurrent account: 40702810870010234730MOSCOW BRANCH OF JSC CB "MODULBANK" MoscowBIC 044525092Correspondent account 30101810645250000092CEO of Nazyrov Anton