Our engineering in action
On the example of the floor arrangement for the largest transport and logistics center of Belarus "Prilesye"

POLYMER COATING FOR A PRODUCTION BUILDING IN DMITROV

WE HAVE SAVED FOR THE CLIENT 273 800
15%Economy
Polymer paint coating for an industrial building in Dmitrov

FLOOR ENGINEERING CONSTRUCTION Polymer paint coating for an industrial building in Dmitrov

MO, Dmitrov, Birlovo Pole str., 18
Characteristics and description
Company name
LLC "VILSEN GROUP"
The purpose of the floor and the room itself
Polymer paint coating for an industrial building in Dmitrov
Type of floor
polymer floors
Thickness of the polymer coating
3 mm
Room area
1220 m²

Customer needs AND THE OPTIMAL ENGINEERING SOLUTION

factors taken into account when developing the floor design

OPTIMAL ENGINEERING SOLUTION

Two months ago, we already completed a polymer coating for this client in a 1200 m2 building. This time it was necessary to make the same type of floor for another building, the area of which is 1,220 m2.

The customer named the following requirements for the final coating: resistance to moisture, dust, erasure; aesthetics.

Terms of work
Number of days for all work: 7
Requirements for the quality of work
Floors must comply with SNiP 2.03. 13-88
Appearance of floors
Must look presentable
Durability
Service life of floors without repair (years): 10
Total cost
Budget within the framework of: 1 825 600 ₽
Polymer paint coating for an industrial building in Dmitrov: The object before the start of work
The object before the start of work

Floor arrangement ACCORDING TO THE ENGINEERING SOLUTION FOR THE OBJECT: LLC "VILSEN GROUP"

how we implemented this floor design

FEATURES OF THE WORKS

Before the work began, it was discovered that water was flowing on a concrete base at the facility. Together we solved the problem – we brought the burners, and the customer dried them.

Pits on a concrete base were noticed. This point was settled by additional priming. Also, unlike the previous room, in this one, after dedusting, dimples, potholes, cavities were opened – they had to be partially putty.

OUR RESULTS

The client now has another building in which a high-quality polymer coating has appeared. And it looks like our cooperation will continue, because he has plans for another room.

Stages of implementation engineering design of the floor

engineering design of the floor
1.jpg
The base is dust-free
2.jpg
Large differences are sealed with a primer
3.jpg
The putty stage
4.jpg
Completed all the work before applying the polymer layer

The result of floor engineeringDELIVERED ON TIME, STANDARD, TECHNOLOGICAL INDUSTRIAL FLOORS AT THE FACILITY LLC "VILSEN GROUP"

SEE THE RESULT OF OUR WORK
result-vilsen-group-1220m2.jpg

READ REVIEWS OUR SATISFIED CUSTOMERS

Reviews that we managed to collect between production cycles at our facilities

ReviewsABOUT THE PROFTEHPOL PROJECT

We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.

We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.

Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.

Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.

Our clients Which we are proud of

for which we have made good floors
Legal informationSociety Limited Liability "PROFTECHENGINEERING" Shareholdt International consumer society "GOLDEN AXIS"TIN 9709064635CHECKPOINT 770901001OGRN 1207700295406Legal address:109147, Moscow, B.Andronevskaya str., 23, building 1, floor 8, room 4, office of PROFTEHPOL company
POSTAL DETAILSActual address:109147, Moscow, B.Andronevskaya str., 23, building 1, floor 8, room 4, office of PROFTEHPOL companyPhone number for details:8 800 550 90 72E-mail:info@proftechpol.ru
Financial detailsCurrent account: 40702810870010234730MOSCOW BRANCH OF JSC CB "MODULBANK" MoscowBIC 044525092Correspondent account 30101810645250000092CEO of Nazyrov Anton