| Characteristics and description |
|---|
Company name LLC "Respect Construction Company" |
The purpose of the floor and the room itself Self-leveling polyurethane coating for the workshop of LLC "Respect Construction Company", Balashikha |
Type of floor polymer floors |
Thickness of the polymer coating 2.5 mm |
Room area 488 sq. m. |
The general contractor approached us with a task – to perform work on the installation of a polymer epoxy floor in the production shop. The general contractor performed the work on the foundation on his own.
The following aspects are important to the customer:
Terms of work Number of days for all work: 7 |
Requirements for the quality of work Floors must comply with SNiP 2.03. 13-88 |
Appearance of floors Must look presentable |
Durability Service life of floors without repair (years): 20 |
Total cost Budget within the framework of: 995 000 ₽ |
There are many trays throughout the entire area of the room, which is why a large number of junctions were made. As mentioned above, the foundation was done by the general contractor on his own, but the work was poorly done. Somewhere the abutments were located above, somewhere below. In short, at our stages of work, we had a lot of trouble with this.
Another difficulty is that the general contractor chose a cheap system that had little chemistry and a lot of sand. Because of this, it was not easy to get a smooth surface.
We have completed our stages of work well and within the agreed time frame. By the way, INGRI materials were used at this facility for the first time, and the materials, it should be noted, turned out to be of good quality.
We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.
We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.
Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.
Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.