| Characteristics and description |
|---|
Company name Electroprovod JSC |
The purpose of the floor and the room itself Topping floor for a new workshop in Podolsk |
Type of floor topping floors |
Thickness of the concrete layer 18 cm |
Room area 1584 m² |
Our regular client has already contacted us for the fourth time, and even before we completed his previous project.
The design was selected in accordance with the client’s project — a hardened concrete floor with an average thickness of 180 mm and a double layer of reinforcement cage.
Terms of work Number of days for all work: 47 |
Requirements for the quality of work Floors must comply with SNiP 2.03. 13-88 |
Appearance of floors Must look presentable |
Durability Service life of floors without repair (years): 10 |
Total cost Budget within the framework of: 5 330 300 ₽ |
The customer carried out the base on their own, but entrusted the final alignment to us. This approach, which is rare in our practice, turned out to be reasonable: rough work can be entrusted to any builders, but the final stage is better to entrust to specialists.
Although the base required adjustments in some places, overall this allowed us to achieve the required accuracy before installing the floor.
With a thickness of 180 mm, the interlayer reinforcement fixators (or simply "frogs") had to be made very low, which was quite difficult. But we managed.
The customer suggested that the filling be done in two stages. However, we insisted on doing the entire job at once, as it was faster and within our capabilities.
There was a small incident: before entering the building, cement milk got on the asphalt. At the client's request, we promptly resolved the situation by negotiating with a local worker, and the issue was resolved for a small fee.
The client accepted the object without a single remark, which is recorded in the act of completed work. Well, we believe in the sign: where the fourth successfully completed object, there is not far to the sixth.
We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.
We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.
Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.
Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.