Our engineering in action
On the example of the floor arrangement for the largest transport and logistics center of Belarus "Prilesye"

TOPPING FLOOR FOR GARAGE IN THE KOLOMENSKOYE DISTRICT OF THE MOSCOW REGION

WE HAVE SAVED FOR THE CLIENT 170 100
20%Economy
Topping floor for garage in Kolomenskoye district of Moscow region

FLOOR ENGINEERING CONSTRUCTION Topping floor for garage in Kolomenskoye district of Moscow region

Moscow region, Kolomensky district, Moschanitsy village, SNT Berezka-1, plot 82
Characteristics and description
Company name
Individual entrepreneur
The purpose of the floor and the room itself
Topping floor for garage in Kolomenskoye district of Moscow region
Type of floor
topping floors
Thickness of the concrete layer
11 cm
Room area
151.5 m²

Customer needs AND THE OPTIMAL ENGINEERING SOLUTION

factors taken into account when developing the floor design

WE HAVE SELECTED THE OPTIMAL ENGINEERING SOLUTION

The customer contacted us to perform work in a private garage, where he independently installed a underfloor heating system. After a detailed technical interview with the client and a visit to the facility itself, our design department developed such a technical solution – a topping floor with an average thickness of 110 mm, reinforced with polypropylene macrofibre.

Terms of work
Number of days for all work: 26
Requirements for the quality of work
Floors must comply with SNiP 2.03. 13-88
Appearance of floors
Must look presentable
Durability
Service life of floors without repair (years): 10
Total cost
Budget within the framework of: 850 500 ₽
Topping floor for garage in Kolomenskoye district of Moscow region: The object before the start of work
The object before the start of work

Floor arrangement ACCORDING TO THE ENGINEERING SOLUTION FOR THE OBJECT: Individual entrepreneur

how we implemented this floor design

FEATURES OF THE WORK

The object was located far from Moscow, about 70 km away. Moreover, there were no larger settlements nearby. Not everyone had a mobile connection in that place.

As mentioned above, the customer prepared the underfloor heating system himself. When we arrived at the site, we saw that it was not installed well enough and immediately informed the client about it. He fixed all the tubes more securely so that they would not float in the concrete and thus not be damaged later when cutting seams.

OUR RESULTS

We very rarely take on private objects, but we do them as well as industrial ones. Therefore, the owner of this garage can be calm - the floor made will serve for years.

Stages of implementation engineering design of the floor

engineering design of the floor
1.jpg
Weld the corner
2.jpg
Installation of a boom concrete pump
3.jpg
Pouring has begun
4.jpg
Laying the concrete mix
5.jpg
Compacting the concrete with a vibrating screed
6.jpg
Repairing the vibrating screed part
7.jpg
Leveling with a manual screed along the guides
8.jpg
Filling with topping
9.jpg
Finishing with a power trowe
10.jpg
A membrane-forming agent has applied to the surface
11.jpg
Checking the flatness of the floor
12.jpg
Marking of seams
13.jpg
Cutting seams
14.jpg
Checking the depth of the cut seams

The result of floor engineeringDELIVERED ON TIME, STANDARD, TECHNOLOGICAL INDUSTRIAL FLOORS AT THE FACILITY Individual entrepreneur

SEE THE RESULT OF OUR WORK
result-ip-naumov-mo-derevnya-moshchanicy.jpg

READ REVIEWS OUR SATISFIED CUSTOMERS

Reviews that we managed to collect between production cycles at our facilities

ReviewsABOUT THE PROFTEHPOL PROJECT

We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.

We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.

Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.

Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.

Our clients Which we are proud of

for which we have made good floors
Legal informationSociety Limited Liability "PROFTECHENGINEERING" Shareholdt International consumer society "GOLDEN AXIS"TIN 9709064635CHECKPOINT 770901001OGRN 1207700295406Legal address:109147, Moscow, B.Andronevskaya str., 23, building 1, floor 8, room 4, office of PROFTEHPOL company
POSTAL DETAILSActual address:109147, Moscow, B.Andronevskaya str., 23, building 1, floor 8, room 4, office of PROFTEHPOL companyPhone number for details:8 800 550 90 72E-mail:info@proftechpol.ru
Financial detailsCurrent account: 40702810870010234730MOSCOW BRANCH OF JSC CB "MODULBANK" MoscowBIC 044525092Correspondent account 30101810645250000092CEO of Nazyrov Anton