Our engineering in action
On the example of the floor arrangement for the largest transport and logistics center of Belarus "Prilesye"

TOPPING FLOOR FOR PRODUCTION IN THE RAMENSKOYE DISTRICT OF THE MOSCOW REGION

WE HAVE SAVED FOR THE CLIENT 573 700
20%Economy
Topping floor for production in the Ramenskoye district of the Moscow region

FLOOR ENGINEERING CONSTRUCTION Topping floor for production in the Ramenskoye district of the Moscow region

Moscow region, Ramensky G.O., Kulakovo village
Characteristics and description
Company name
TechGarant LLC
The purpose of the floor and the room itself
Topping floor for production in the Ramenskoye district of the Moscow region
Type of floor
topping floors
Thickness of the concrete layer
16 cm
Room area
644.4 m²

Customer needs AND THE OPTIMAL ENGINEERING SOLUTION

factors taken into account when developing the floor design

WE HAVE SELECTED THE OPTIMAL ENGINEERING SOLUTION

At the wooden crate production facility, it was necessary to make floors and a ramp near the gate. The customer called the key parameter of the new floor resistance to moisture, dust, and abrasion.

Taking into account all the features, the following technical solution was selected – a concrete floor with topping, reinforced with steel fiber; a concrete ramp with a combined reinforcement reinforcement frame and polypropylene macrofibre.

Terms of work
Number of days for all work: 8
Requirements for the quality of work
Floors must comply with SNiP 2.03. 13-88
Appearance of floors
Must look presentable
Durability
Service life of floors without repair (years): 10
Total cost
Budget within the framework of: 2 868 700 ₽
Topping floor for production in the Ramenskoye district of the Moscow region: The object before the start of work
The object before the start of work

Floor arrangement ACCORDING TO THE ENGINEERING SOLUTION FOR THE OBJECT: TechGarant LLC

how we implemented this floor design

FEATURES OF THE WORK

There were pits in some places of the base. The customer covered them with sand himself, we measured them with a special device, and the result was unsatisfactory. Then, together with the client's workers, we completed the sandy base.

In areas with a total area of 95 m2, where the base was destroyed, the reinforcement was additionally laid in one layer.

The concrete plant was offered to us by the customer himself. As a result, we worked with him, since he was located near the facility and successfully passed our on-site inspection.

OUR RESULTS

We did the work on the site on time and in accordance with standard technology. The client was satisfied with the result.

Stages of implementation engineering design of the floor

engineering design of the floor
1.jpg
The film and the damping tape are in place
2.jpg
The customer has hung the lamps inside
3.jpg
The pits has been filled in
4.jpg
Unloading of fittings
5.jpg
The base has been prepared to the required level
6.jpg
The film has been laid; we are putting the fittings in the right places
7.jpg
The formwork and the corner around the pipes
8.jpg
The concrete pump and the first mixer are on site
9.jpg
The filling has started
10.jpg
Continue filling
11.jpg
Grout stage – working with the control rail
12.jpg
The filled ramp on the street
13.jpg
The grout has been completed
14.jpg
Cutting of the shrinkage joints
15.jpg
The seams has been cut
16.jpg
Cleaning the object with a vacuum cleaner

The result of floor engineeringDELIVERED ON TIME, STANDARD, TECHNOLOGICAL INDUSTRIAL FLOORS AT THE FACILITY TechGarant LLC

SEE THE RESULT OF OUR WORK
result-techgarant-ramenskij-rajon.jpg

READ REVIEWS OUR SATISFIED CUSTOMERS

Reviews that we managed to collect between production cycles at our facilities

ReviewsABOUT THE PROFTEHPOL PROJECT

We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.

We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.

Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.

Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.

Our clients Which we are proud of

for which we have made good floors
Legal informationSociety Limited Liability "PROFTECHENGINEERING" Shareholdt International consumer society "GOLDEN AXIS"TIN 9709064635CHECKPOINT 770901001OGRN 1207700295406Legal address:109147, Moscow, B.Andronevskaya str., 23, building 1, floor 8, room 4, office of PROFTEHPOL company
POSTAL DETAILSActual address:109147, Moscow, B.Andronevskaya str., 23, building 1, floor 8, room 4, office of PROFTEHPOL companyPhone number for details:8 800 550 90 72E-mail:info@proftechpol.ru
Financial detailsCurrent account: 40702810870010234730MOSCOW BRANCH OF JSC CB "MODULBANK" MoscowBIC 044525092Correspondent account 30101810645250000092CEO of Nazyrov Anton