Portfolio
Topping floor for production premises in Khimki (mkrn Skhodnya)

INDUSTRIAL FLOOR AT THE FACTORY IN SKHODNYA

WE HAVE SAVED FOR THE CLIENT 423 200 ₽

20%Economy

FLOOR ENGINEERING CONSTRUCTION Topping floor for production premises in Khimki (mkrn Skhodnya)

MO, Khimki, MKR Skhodnya, Nekrasova str., 2, room 105

Characteristics and description
Company name EUROPLITSPB LLC
The purpose of the floor and the room itself Topping floor for production premises in Khimki (mkrn Skhodnya)
Type of floor topping floors
Thickness of the concrete layer 100 cm
Room area 1000 m²

Customer needs AND THE OPTIMAL ENGINEERING SOLUTION

factors taken into account when developing the floor design

WE HAVE CHOSEN THE OPTIMAL ENGINEERING SOLUTION

To begin with, we note the efficiency of the customer himself at the negotiation stage. A few days after meeting our company, he made the payment.

The client's company had a production facility that he rented. It was necessary to fill only half of the room – to make a full fill along the length, but to leave a meter of distance untouched along the width on the right side. This was due to the fact that the doors were located on the wall below, and when filling the entire area, they would have to be lifted. But the customer was not going to use the doors in the future.

We have proposed a technical solution – a concrete floor with a hardener reinforced with macrofibre.

The following aspects are important to the customer:

Terms of work

Number of days for all work: 16

Requirements for the quality of work

Floors must comply with SNiP 2.03. 13-88

Appearance of floors

Must look presentable

Durability

Service life of floors without repair (years): 10

Total cost

Budget within the framework of: 2 116 000 ₽

Topping floor for production premises in Khimki (mkrn Skhodnya): The object before the start of work — The object before the start of work

Floor arrangement ACCORDING TO THE ENGINEERING SOLUTION FOR THE OBJECT: EUROPLITSPB LLC

how we implemented this floor design

FEATURES OF THE WORKS

On the left side of the room, the wall was made of profiled sheet, which did not reach the base a little. To prevent the concrete from leaking, we continued the film, which always spreads on the floors, in two layers to the profiled sheet.

There was a pit in one corner of the room. And the client, even when applying, outlined his request – to make a more or less level floor. At the same time, he understood that with the final coating, the unevenness could be repeated. We calculated the geometry of the floor and made the floor in three planes. The first one was filled into the horizon, the second one was tilted to the left, and the third one was tilted both forward and to the right. Thanks to this engineering solution, the final floor began to visually appear smooth. In addition, we did not make a large consumption of concrete and thereby saved the client a decent amount of money.

OUR RESULTS

The customer liked the result of the work very much. He said that the resulting coverage turned out to be even better than initially expected. For a full review, see the letter of thanks from the General Director of EuroPlitMsk LLC on this page.

Stages of implementation engineering design of the floor

engineering design of the floor

Filling the fiber into the concrete pump

The result of floor engineeringDELIVERED ON TIME, STANDARD, TECHNOLOGICAL INDUSTRIAL FLOORS AT THE FACILITY EUROPLITSPB LLC

SEE THE RESULT OF OUR WORK

READ REVIEWS OUR SATISFIED CUSTOMERS

Reviews that we managed to collect between production cycles at our facilities

ReviewsABOUT THE PROFTEHPOL PROJECT

We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.

We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.

Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.

Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.

Our clients Which we are proud of

for which we have made good floors