Our engineering in action
On the example of the floor arrangement for the largest transport and logistics center of Belarus "Prilesye"

TOPPING FLOOR IN AN OFFICE AND WAREHOUSE NEAR THE PROKSHINO METRO STATION IN MOSCOW

WE HAVE SAVED FOR THE CLIENT 135 600
20%Economy
Topping floor in an office and warehouse near the Prokshino metro station in Moscow

FLOOR ENGINEERING CONSTRUCTION Topping floor in an office and warehouse near the Prokshino metro station in Moscow

Мәскеу, Коммунарка ауданы, Прокшинский даңғылы, 12-үй
Characteristics and description
Company name
Individual entrepreneur
The purpose of the floor and the room itself
Topping floor in an office and warehouse near the Prokshino metro station in Moscow
Type of floor
topping floors
Thickness of the concrete layer
12.5 cm
Room area
300.2 m²

Customer needs AND THE OPTIMAL ENGINEERING SOLUTION

factors taken into account when developing the floor design

WE HAVE SELECTED THE OPTIMAL ENGINEERING SOLUTION

In the Prokshino residential complex, it was necessary to make a floor for industrial loads in an office and warehouse space.

Since the facility already had an old concrete base, the technical solution was chosen as follows – a 12.5 cm thick concrete screed with topping and reinforcement with plastic fiber.

Terms of work
Number of days for all work: 5
Requirements for the quality of work
Floors must comply with SNiP 2.03. 13-88
Appearance of floors
Must look presentable
Durability
Service life of floors without repair (years): 10
Total cost
Budget within the framework of: 678 000 ₽
Topping floor in an office and warehouse near the Prokshino metro station in Moscow: The object before the start of work
The object before the start of work

Floor arrangement ACCORDING TO THE ENGINEERING SOLUTION FOR THE OBJECT: Individual entrepreneur

how we implemented this floor design

FEATURES OF THE WORK

The area around the facility did not have a place to flush the concrete mixer truck after pouring. Therefore, at the preparation stage, a special tray was built from pre-ordered materials.

We have been waiting for a long time for a signal from the client to come and seal the seams. But the room is already fully functioning and filled with goods, which is why it is not possible to come and perform this step on the entire area. We agreed with the customer that we will deliver the sealant, and he will seal the seams himself.

OUR RESULTS

The floors have been in full use for more than two months now, and there have been no complaints. We are sure that this will continue for many more years.

Stages of implementation engineering design of the floor

engineering design of the floor
1.jpg
The fiber has been brought to the facility
2.jpg
Topping has been brought to the facility
3.jpg
Making a mixer flushing box
4.jpg
Filling
5.jpg
The grout has been completed and a moisture-retaining varnish has been applied
6.jpg
The seams have been cut

The result of floor engineeringDELIVERED ON TIME, STANDARD, TECHNOLOGICAL INDUSTRIAL FLOORS AT THE FACILITY Individual entrepreneur

SEE THE RESULT OF OUR WORK
result-ip-usmanbaev-sosenskoje.jpg

READ REVIEWS OUR SATISFIED CUSTOMERS

Reviews that we managed to collect between production cycles at our facilities

ReviewsABOUT THE PROFTEHPOL PROJECT

We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.

We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.

Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.

Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.

Our clients Which we are proud of

for which we have made good floors
Legal informationSociety Limited Liability "PROFTECHENGINEERING" Shareholdt International consumer society "GOLDEN AXIS"TIN 9709064635CHECKPOINT 770901001OGRN 1207700295406Legal address:109147, Moscow, B.Andronevskaya str., 23, building 1, floor 8, room 4, office of PROFTEHPOL company
POSTAL DETAILSActual address:109147, Moscow, B.Andronevskaya str., 23, building 1, floor 8, room 4, office of PROFTEHPOL companyPhone number for details:8 800 550 90 72E-mail:info@proftechpol.ru
Financial detailsCurrent account: 40702810870010234730MOSCOW BRANCH OF JSC CB "MODULBANK" MoscowBIC 044525092Correspondent account 30101810645250000092CEO of Nazyrov Anton