| Characteristics and description |
|---|
Company name LLC "IRON" |
The purpose of the floor and the room itself Warehouse of perfumery products of LLC "IRON", Moscow, m.Begovaya |
Type of floor topping floors |
Thickness of the concrete layer 120 cm |
Room area 415 sq. m. |
The client needed a floor for the warehouse where he was going to store perfumes. There it was supposed to operate loaders weighing 3,500 kg, and subsequently it was planned to install two-tier racks.
The following aspects are important to the customer:
Terms of work Number of days for all work: 7 |
Requirements for the quality of work Floors must comply with SNiP 2.03. 13-88 |
Appearance of floors Must look presentable |
Durability Service life of floors without repair (years): 12 |
Total cost Budget within the framework of: 700 000 ₽ |
Initially, it was planned to reinforce concrete with reinforcing mesh at the facility. However, based on the data of our technical specialist, we calculated the cost and sent our more favorable offer to the customer. We offered him a 100 mm thick floor with a corundum hardener reinforced with polypropylene fiber.
Fibro-concrete floor technology, unlike reinforced with reinforcement, has a number of advantages. Single fittings work only for the bottom or only for the top, and double will be a good addition to the budget. The fiber works all over the base and in some respects even surpasses the reinforcing mesh, namely:
The technology we have proposed has reduced the cost by 30%, because steel fiber is cheaper than rebar. It significantly reduces the production time, because it does not need to be reinforced with a reinforcing mesh. At the same time, concrete is already supplied with fiber.
Our task at this facility was to completely dismantle the old foundation and pour a new concrete floor. M300 grade concrete was used, as it has optimal technical characteristics.
During the production process, we also got acquainted with the customer's representative. He outlined completely different requirements than we received from the contractor. As a result, we adjusted our offer by increasing the thickness of concrete to 120 mm, so that loaders on plastic wheels, which we did not know about before, could also ride on it and it could withstand their load. It is good that the customer informed us of this information and we took this moment into account when designing the floor for his warehouse.
As a result of the work, the client received a concrete floor with high performance in accordance with SNIP 2.03.13-88.
The stages of the floor arrangement and the final result are shown in the photo below.
We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.
We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.
Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.
Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.