| Characteristics and description |
|---|
Company name АО «6-й таксомоторный парк» |
The purpose of the floor and the room itself Concrete floor with a hardener for a car wash in Moscow |
Type of floor topping floors |
Thickness of the concrete layer 15 cm |
Room area 703.62 m² |
The complex of works at this facility was designed for several months, as it consisted of three large separate stages – 1) dismantling of the old concrete screed, 2) installation of trays and sand traps, 3) floor installation.
The technical solution was chosen as follows – a concrete floor with a reinforcing top layer with an average thickness of 150 mm with a reinforcing frame and plastic fiber.
Terms of work Number of days for all work: 60 |
Requirements for the quality of work Floors must comply with SNiP 2.03. 13-88 |
Appearance of floors Must look presentable |
Durability Service life of floors without repair (years): 10 |
Total cost Budget within the framework of: 5 498 000 ₽ |
We have divided the first stage, the dismantling work, into two parts. First, the main part with an area of about 600 m2, and then the remaining plot. To dismantle the main area, we used a remote-controlled robot, but also worked manually.
We had to try with the arrangement of the trays – they were of different lengths, widths and depths. It was also not easy with sand traps, since the original products were small. We dug two large pits, filled the foundations for the concrete containers brought by the customer, connected them to the trays and thus obtained a suitable design.
Due to the large number of trays, the floor design assumed the presence of slopes from different sides. To do this, the sandy base was prepared immediately at an angle, and then guides were installed.
The car wash now boasts a modern, durable concrete floor that meets all production requirements, as well as a modern functional system of trays and sand traps.
We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.
We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.
Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.
Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.