Portfolio
Concrete floor with a hardener for a warehouse in Odintsovo

INDUSTRIAL FLOOR IN STOCK IN ODINTSOVO

WE HAVE SAVED FOR THE CLIENT 420 000 ₽

FLOOR ENGINEERING CONSTRUCTION Concrete floor with a hardener for a warehouse in Odintsovo

MO, Odintsovo, Transport ave., 3, block 2

Characteristics and description
Company name JSC"Odilak"
The purpose of the floor and the room itself Concrete floor with a hardener for a warehouse in Odintsovo
Type of floor topping floors
Thickness of the concrete layer 110 cm
Room area 551.8 m²

Customer needs AND THE OPTIMAL ENGINEERING SOLUTION

factors taken into account when developing the floor design

WE HAVE SELECTED THE OPTIMAL ENGINEERING SOLUTION

The object consisted of one large corridor and two more rooms. The customer initially approached us with the idea of his design, according to which the floor will have one layer of mesh. Since the concrete base had already taken place, he proposed to make a coating with a single layer of mesh. We offered our own option – the option of reinforcement not with mesh, but with fiber. And in the course of negotiations, we agreed on this option and approved a technical solution in the form of a concrete floor with a hardener reinforced with polypropylene fiber.

Of the additional works, the dismantling of the old foundation in three places, the manufacture of a pit in one of the rooms and a ramp near the gate were agreed.

The following aspects are important to the customer:

Terms of work

Number of days for all work: 15

Requirements for the quality of work

Floors must comply with SNiP 2.03. 13-88

Appearance of floors

Must look presentable

Durability

Service life of floors without repair (years): 10

Total cost

Budget within the framework of: 2 100 000 ₽

Concrete floor with a hardener for a warehouse in Odintsovo: The object before the start of work — The object before the start of work

Floor arrangement ACCORDING TO THE ENGINEERING SOLUTION FOR THE OBJECT: JSC"Odilak"

how we implemented this floor design

FEATURES OF THE WORKS

At the stage of dismantling the old coating, we initially planned that the concrete fight would be able to be stacked somewhere on the site. However, the volume of the battle turned out to be too large, the customer did not have a place for him. Additionally, Kamaz and a loader were called to solve this issue.

During the dismantling and pouring works, it turned out that we blocked the passage and passage from one room to another, and the client needed to continue his work, since this is an operating paint and varnish company. Therefore, at his suggestion and approval, an additional passage was recaptured a little further and thereby made.

Since there were a lot of quick-burning substances in this paint and varnish company, various documents on fire safety and electrical safety were required from us.

In one of the rooms, the customer did not remove the racks. Therefore, the floor was filled in these places along with the legs of the shelves. And there I had to work not with an ordinary two-rotor machine, but manually with a single-rotor to get a smooth and even floor.

OUR RESULTS

At each stage of the work, we acted according to the technical solution and the technical program, while trying to take into account all the wishes of the client. As a result of the work, he received a smooth, smooth and durable industrial floor at his facility.

Stages of implementation engineering design of the floor

engineering design of the floor

The dismantling of the old coating continues

We have prepared the pins for the guides

A moisture-retaining impregnation was applied

The result of floor engineeringDELIVERED ON TIME, STANDARD, TECHNOLOGICAL INDUSTRIAL FLOORS AT THE FACILITY JSC"Odilak"

SEE THE RESULT OF OUR WORK

READ REVIEWS OUR SATISFIED CUSTOMERS

Reviews that we managed to collect between production cycles at our facilities

ReviewsABOUT THE PROFTEHPOL PROJECT

We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.

We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.

Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.

Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.

Our clients Which we are proud of

for which we have made good floors