Our engineering in action
On the example of the floor arrangement for the largest transport and logistics center of Belarus "Prilesye"

INDUSTRIAL FLOOR FOR TWO WAREHOUSES IN PAVLOVO-POSADSKY CITY DISTRICT

WE HAVE SAVED FOR THE CLIENT 717 100

FLOOR ENGINEERING CONSTRUCTION Concrete floor with a reinforcing top layer for a warehouse in the Fateevo Park Industrial Park in the Moscow region

MO, Pavlovo-Posadsky G.O., Industrial Park "Fateevo Park", plot 50
Characteristics and description
Company name
Individual entrepreneur
The purpose of the floor and the room itself
Concrete floor with a reinforcing top layer for a warehouse in the Fateevo Park Industrial Park in the Moscow region
Type of floor
topping floors
Thickness of the concrete layer
150 cm
Room area
1045.44 m²

Customer needs AND THE OPTIMAL ENGINEERING SOLUTION

factors taken into account when developing the floor design

WE HAVE SELECTED THE OPTIMAL ENGINEERING SOLUTION

The customer had two areas where it was required to make concrete floors: 1) in an almost completed warehouse with a half-finished roof and 2) on a ready-made foundation, where the building was just to be erected. The technical solution was chosen as follows: concrete floor with a hardener, reinforced with steel fiber.

The following aspects are important to the customer:

Terms of work
Number of days for all work: 24
Requirements for the quality of work
Floors must comply with SNiP 2.03. 13-88
Appearance of floors
Must look presentable
Durability
Service life of floors without repair (years): 10
Total cost
Budget within the framework of: 3 585 400 ₽
Concrete floor with a reinforcing top layer for a warehouse in the Fateevo Park Industrial Park in the Moscow region: The object before the start of work
The object before the start of work

Floor arrangement ACCORDING TO THE ENGINEERING SOLUTION FOR THE OBJECT: Individual entrepreneur

how we implemented this floor design

FEATURES OF THE WORKS

At this facility, in addition to directly pouring and grouting concrete, we also prepared a sandy base. The customer provided the sand, but we did everything else – we drove a skating rink, our workers leveled and prepared the sand, vibrated it and compacted it properly. And only then began work on pouring concrete.

Initially, the client thought that we would complete the filling in two stages, but we did it in one. The fact is that in a building with an unfinished roof, the customer first of all wanted to finish it. However, in those days the weather made its own adjustments and there was a strong wind. The workers who were engaged in the roof could not do their job in such a situation. We waited a few days and decided to discuss with the customer such an option that first we will do the work on the floor, and then the "roof guards" will do their work. That's what they agreed on.

At the grout stage, there were some nuances with protruding fiber. We sent a repairman to the facility, and he settled everything.

OUR RESULTS

The customer made the right decision that it is necessary to take care of good floors at the initial stages of the construction of buildings. Now this issue has been resolved for him for many years.

Stages of implementation engineering design of the floor

engineering design of the floor
1.jpg
The skating rink was delivered to the facility
2.jpg
Preparation of the sand base
3.jpg
Manual vibrating plate in place
4.jpg
The preparation of the foundation continues
5.jpg
Preparation of ramps
6.jpg
Started filling
7.jpg
Grout is completed; varnish is applied
8.jpg
We have completed the cutting of seams

The result of floor engineeringDELIVERED ON TIME, STANDARD, TECHNOLOGICAL INDUSTRIAL FLOORS AT THE FACILITY Individual entrepreneur

SEE THE RESULT OF OUR WORK
result-ip-shadrintseva.jpg

READ REVIEWS OUR SATISFIED CUSTOMERS

Reviews that we managed to collect between production cycles at our facilities

ReviewsABOUT THE PROFTEHPOL PROJECT

We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.

We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.

Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.

Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.

Our clients Which we are proud of

for which we have made good floors
Legal informationSociety Limited Liability "PROFTECHENGINEERING" Shareholdt International consumer society "GOLDEN AXIS"TIN 9709064635CHECKPOINT 770901001OGRN 1207700295406Legal address:109147, Moscow, B.Andronevskaya str., 23, building 1, floor 8, room 4, office of PROFTEHPOL company
POSTAL DETAILSActual address:109147, Moscow, B.Andronevskaya str., 23, building 1, floor 8, room 4, office of PROFTEHPOL companyPhone number for details:8 800 550 90 72E-mail:info@proftechpol.ru
Financial detailsCurrent account: 40702810870010234730MOSCOW BRANCH OF JSC CB "MODULBANK" MoscowBIC 044525092Correspondent account 30101810645250000092CEO of Nazyrov Anton