Our engineering in action
On the example of the floor arrangement for the largest transport and logistics center of Belarus "Prilesye"

CONCRETE FLOOR WITH WHITE TOPPING FOR OFFICE IN MOSCOW

WE HAVE SAVED FOR THE CLIENT 613 800

FLOOR ENGINEERING CONSTRUCTION Concrete floor with white topping for office in Moscow

Moscow, Mironovskaya, 33, p. 9
Characteristics and description
Company name
NPO TACIT LLC
The purpose of the floor and the room itself
Concrete floor with white topping for office in Moscow
Type of floor
topping floors
Thickness of the concrete layer
13 cm
Room area
844 m²

Customer needs AND THE OPTIMAL ENGINEERING SOLUTION

factors taken into account when developing the floor design

WE HAVE SELECTED THE OPTIMAL ENGINEERING SOLUTION

In the Sokolinaya Gora district of Moscow, it was necessary to make a light floor for an office space on the ground floor. The following technical solution was identified – a concrete floor with white topping reinforced with polypropylene macrofibre. The average thickness of the structure is 130 mm.

The complex of works also included the installation of a ramp on the street and a retaining wall between it and the parking lot.

Terms of work
Number of days for all work: 5
Requirements for the quality of work
Floors must comply with SNiP 2.03. 13-88
Appearance of floors
Must look presentable
Durability
Service life of floors without repair (years): 10
Total cost
Budget within the framework of: 3 069 400 ₽
Concrete floor with white topping for office in Moscow: The object before the start of work
The object before the start of work

Floor arrangement ACCORDING TO THE ENGINEERING SOLUTION FOR THE OBJECT: NPO TACIT LLC

how we implemented this floor design

FEATURES OF THE WORK

Since white topping was part of the design, it had to be handled more carefully and diligently than usual.

Unfortunately, there were defects during the work: fiber stuck out in two places, and small cracks appeared. Naturally, we did not ignore this – at the stage of sealing the seams, we eliminated the protruding fiber and sealed the cracks.

OUR RESULTS

The office floor turned out to be very beautiful and, thanks to a properly selected design, strong and durable. Now the client has solved this issue for many years.

The customer also plans to make a floor on another floor of the same building. We believe that we have established ourselves as reliable contractors, so we look forward to further cooperation.

Stages of implementation engineering design of the floor

engineering design of the floor
1.jpg
Dismantling the base
2.jpg
The dismantling has been completed
3.jpg
Materials were delivered to the facility
4.jpg
Preparatory work
5.jpg
Preparatory work continues
6.jpg
The formwork for the retaining wall was assembled
7.jpg
Tied the rebar under the ramp
8.jpg
The concrete pump is in place; the track has been assembled
9.jpg
The filling stage
10.jpg
Completed the filling
11.jpg
Mashing
12.jpg
The grout was completed; the varnish was applied
13.jpg
The seam cutting stage
14.jpg
We have finished cutting the shrinkage seams
15.jpg
The object before sealing
16.jpg
The seams were sealed

The result of floor engineeringDELIVERED ON TIME, STANDARD, TECHNOLOGICAL INDUSTRIAL FLOORS AT THE FACILITY NPO TACIT LLC

SEE THE RESULT OF OUR WORK
result-npo-tatsit-mironovskaya.jpg

READ REVIEWS OUR SATISFIED CUSTOMERS

Reviews that we managed to collect between production cycles at our facilities

ReviewsABOUT THE PROFTEHPOL PROJECT

We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.

We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.

Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.

Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.

Our clients Which we are proud of

for which we have made good floors
Legal informationSociety Limited Liability "PROFTECHENGINEERING" Shareholdt International consumer society "GOLDEN AXIS"TIN 9709064635CHECKPOINT 770901001OGRN 1207700295406Legal address:109147, Moscow, B.Andronevskaya str., 23, building 1, floor 8, room 4, office of PROFTEHPOL company
POSTAL DETAILSActual address:109147, Moscow, B.Andronevskaya str., 23, building 1, floor 8, room 4, office of PROFTEHPOL companyPhone number for details:8 800 550 90 72E-mail:info@proftechpol.ru
Financial detailsCurrent account: 40702810870010234730MOSCOW BRANCH OF JSC CB "MODULBANK" MoscowBIC 044525092Correspondent account 30101810645250000092CEO of Nazyrov Anton