| Characteristics and description |
|---|
Company name LLC "Construction management-9" |
The purpose of the floor and the room itself Floor for parking LLC "Construction management-9" |
Type of floor topping floors |
Thickness of the concrete layer 100 cm |
Room area 6000 sq. m. |
The client's need was to install a concrete floor with a hardener in an underground parking lot. The parking was two-level, during the negotiations the client was interested in a low price per square meter, not to the detriment of the quality of the coating.
The following aspects are important to the customer:
Terms of work Number of days for all work: 7 |
Requirements for the quality of work Floors must comply with SNiP 2.03. 13-88 |
Appearance of floors Must look presentable |
Durability Service life of floors without repair (years): 12 |
The client's design solution was expensive, it was a standard concrete floor with double reinforcement. Taking into account the works and materials, a total of 15,753,461 rubles came out according to the customer's estimate. We, in turn, offered a 100 mm thick concrete floor reinforced with polypropylene fiber. This solution has significantly reduced the cost of installing a parking floor. In total, 10,560,389 rubles were issued for all materials and works.
Fibro-concrete floor technology, unlike reinforced with reinforcement, has a number of advantages. A single armature works only for the bottom or only for the top, a double one will be a good blow to the wallet. Fiber works all over the base, and in some respects surpasses the reinforcing mesh, namely:
The technology we have proposed has reduced the cost by 30%, because polypropylene fiber is cheaper than rebar. It significantly reduces the production time, since it does not need to be reinforced with a reinforcing mesh. At the same time, concrete is already supplied with fiber.
After agreeing on all stages of work, our task was to fill the parking floor in the shortest possible time and with high quality. We encountered the first difficulties when completing the work of the first map. As it turned out, the ventilation system worked poorly in the parking lot, and since the ceilings were designed only for passenger cars and were quite low, there was a problem of carbon monoxide. We had to fight this, we came up with a solution to create maximum ventilation of the room – we rented industrial fans and bought personal protective equipment.
During the delivery of the work, the client had no complaints about the quality of the floor. The floor surface has passed all checks. The customer received the main benefit in the form of huge savings in the amount of 5,193,072 rubles.
We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.
We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.
Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.
Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.