| Characteristics and description |
|---|
Company name EZATI LLC |
The purpose of the floor and the room itself Hardened concrete floor for an industrial building in Yegoryevsk |
Type of floor topping floors |
Thickness of the concrete layer 12.5 cm |
Room area 585 m² |
Several years after we completed an industrial floor for this client, they returned with a new request. It was necessary to renovate an area of just under 600 m².
Thanks to engineering solutions, an optimal structure was selected that took all the features of the site into account — a topping floor with an average thickness of 12.5 cm, reinforced with polypropylene fiber and additional reinforcement using mesh in localized areas.
Terms of work Number of days for all work: 33 |
Requirements for the quality of work Floors must comply with SNiP 2.03. 13-88 |
Appearance of floors Must look presentable |
Durability Service life of floors without repair (years): 10 |
Total cost Budget within the framework of: 2 295 000 ₽ |
We would like to highlight the client’s actions — they fulfilled their part of the obligations exceptionally well. For example, during the ramp dismantling (which the customer took on themselves), there was constant coordination on how to do it most efficiently.
There was a challenge in bringing the troweling equipment into the premises. A brainstorming session produced a solution — cut a part of the wall and bring the equipment through that opening. That’s exactly what was done.
It was important for the client that we complete the work before the long November holidays. Everything went exactly as planned!
The industrial floor, executed with all expected loads, operating conditions, and requirements in mind, turned out to be exactly the product we aimed for on this project. We are satisfied, the client is satisfied — what more could one ask for complete success?
We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.
We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.
Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.
Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.