Our engineering in action

On the example of the floor arrangement for the largest transport and logistics center of Belarus "Prilesye"

Portfolio
Polymer floor for a hangar in Krasnogorsk

CONCRETE FLOOR FOR A HANGAR IN KRASNOGORSK

WE HAVE SAVED FOR THE CLIENT 240 000 ₽

44%Economy

FLOOR ENGINEERING CONSTRUCTION Polymer floor for a hangar in Krasnogorsk

MO, Krasnogorsk, Buzlanovo village, Cooperative str., 1B

Characteristics and description
Company name Private person
The purpose of the floor and the room itself Polymer floor for a hangar in Krasnogorsk
Type of floor topping floors
Thickness of the concrete layer 150 cm
Room area 1002 sq. m.

Customer needs AND THE OPTIMAL ENGINEERING SOLUTION

factors taken into account when developing the floor design

FOUND OUT THE NEEDS OF THE CLIENT

In October 2020, we signed a contract to carry out work on the installation of floors. The object is a hangar consisting of two buildings, each of them at its own level. A whole set of tasks was required of us: to remove the foundation; to hollow out the old asphalt; to remove some ground level; to dig trenches under the foundation, pour sand, level and tamp; to put the formwork; to tie the frames for the foundation; and only then to fill the foundation, fill the base, tamp the base, tie the reinforcement and finally pour concrete.

The following aspects are important to the customer:

Terms of work

Number of days for all work: 60

Requirements for the quality of work

Floors must comply with SNiP 2.03. 13-88

Appearance of floors

Must look presentable

Durability

Service life of floors without repair (years): 20

Total cost

Budget within the framework of: 541 000 ₽

Polymer floor for a hangar in Krasnogorsk: The object before the start of work — The object before the start of work

Floor arrangement ACCORDING TO THE ENGINEERING SOLUTION FOR THE OBJECT: Private person

how we implemented this floor design

DIFFICULTIES DURING WORK

Let 's highlight two main difficulties:

The asphalt layer was too big. We ordered a tractor, but he could not break out such a thickness with an ordinary bucket. We spent time and effort, but not very effectively. Therefore, another tractor was called to help – with a hydraulic hammer.
Due to the steep slope, a decent amount of soil was used to level the base.

THE RESULTS OF OUR WORK

In two months of work, we achieved the following result: one hangar was filled at its own level, a step was made, and the second hangar was on another level. This is exactly the result the customer wanted.

The stages of the floor arrangement and the result of the work are shown in the photo below.

Stages of implementation engineering design of the floor

engineering design of the floor

A tractor with a hydraulic hammer was called to help

The dismantling of the old asphalt pavement has been completed

Preparation of trenches for the foundation

We remove the remnants of the old asphalt

We begin to deliver materials for the foundation

We have brought the necessary materials for the foundation

We work with special equipment with the base

We accept and level the concrete mixture

We process the coating with grout machines

The result of floor engineeringDELIVERED ON TIME, STANDARD, TECHNOLOGICAL INDUSTRIAL FLOORS AT THE FACILITY Private person

SEE THE RESULT OF OUR WORK

READ REVIEWS OUR SATISFIED CUSTOMERS

Reviews that we managed to collect between production cycles at our facilities

ReviewsABOUT THE PROFTEHPOL PROJECT

We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.

We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.

Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.

Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.

Our clients Which we are proud of

for which we have made good floors