Portfolio
Bulk polymer coating on cement-sand screed for administrative premises in the laboratory of cathode materials

SELF-LEVELING POLYMER FLOOR FOR THE LABORATORY IN SKOLKOVO

WE HAVE SAVED FOR THE CLIENT 616 200 ₽

15%Economy

Bulk polymer coating on cement-sand screed for administrative premises in the laboratory of cathode materials

FLOOR ENGINEERING CONSTRUCTION Bulk polymer coating on cement-sand screed for administrative premises in the laboratory of cathode materials

Moscow, Bolshoy Boulevard, 30, p. 1; Center for Energy Sciences and Technologies on the territory of IC "Skolkovo"

Characteristics and description
Company name OOO "SoEnergo+"
The purpose of the floor and the room itself Bulk polymer coating on cement-sand screed for administrative premises in the laboratory of cathode materials
Type of floor polymer floors
Thickness of the polymer coating 3 mm
Room area 508.5 m²

Customer needs AND THE OPTIMAL ENGINEERING SOLUTION

factors taken into account when developing the floor design

WE HAVE DETERMINED THE OPTIMAL ENGINEERING SOLUTION

We had to carry out work at this facility strictly according to a ready-made project. According to it, it was required to make a self-leveling polymer coating on a cement-sand screed for administrative premises. At the approval stage, there was only one change that we proposed and subsequently implemented.

Standard self-leveling epoxy floors have a glossy appearance. Such coatings lose their luster and become opaque with prolonged intense exposure. In this case, we have administrative premises, which means that there will be a lot of people moving in them. After some time in such places, the floor would lose its glossiness, and it would be preserved in the corners.

We proposed to make the entire coating matte in order to maintain a uniform appearance. The customer and the general contractor agreed with us and made this change in the final project.

The following aspects are important to the customer:

Terms of work

Number of days for all work: 41

Requirements for the quality of work

Floors must comply with SNiP 2.03. 13-88

Appearance of floors

Must look presentable

Durability

Service life of floors without repair (years): 5

Total cost

Budget within the framework of: 4 108 000 ₽

Bulk polymer coating on cement-sand screed for administrative premises in the laboratory of cathode materials: The object before the start of work — The object before the start of work

Floor arrangement ACCORDING TO THE ENGINEERING SOLUTION FOR THE OBJECT: OOO "SoEnergo+"

how we implemented this floor design

DIFFICULTIES DURING WORK

The object was administrative, not industrial premises. According to the design project, the final coating should have been multicolored. It was necessary to connect polymer materials of different colors and ensure that the junctions were solid.

The second difficulty is that the work was carried out in February and March of this year. Then the prices of materials rose sharply. Because of this, we were 50% out of the estimated cost, which was initially set by the customer. I had to search and select analogues very quickly in order to "get into" the budget. Moreover, each of our choices was coordinated with the customer and the designer. The requirements for the characteristics of materials remained the same – the task was to find cheaper analogues of Russian production. Coped, found.

Well, one more important point. According to the project, the foundation was a cement-sand screed, which we also made. With this kind of foundation as a foundation, most polymerists do not want to work. They believe that the polymer on the screeds simply does not lie, but flakes off. We took up this project. Due to the use of a clear standard technology, this polymer was applied in such a way that it obtained good adhesion to the substrate and at the same time provided high aesthetics of the coating.

OUR RESULTS

Both the customer and the general contractor were satisfied with the final coverage. They now have plans for another facility at the same address, and we are one of the main contenders to be contractors again.

Stages of implementation engineering design of the floor

engineering design of the floor

Sealing of shrinkage joints with polymer composition

The first stage of filling the finishing layer

We are completing the first stage of filling the finishing layer

We are preparing to fill the finish line with the second stage

The result of floor engineeringDELIVERED ON TIME, STANDARD, TECHNOLOGICAL INDUSTRIAL FLOORS AT THE FACILITY OOO "SoEnergo+"

SEE THE RESULT OF OUR WORK

READ REVIEWS OUR SATISFIED CUSTOMERS

Reviews that we managed to collect between production cycles at our facilities

ReviewsABOUT THE PROFTEHPOL PROJECT

We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.

We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.

Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.

Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.

Our clients Which we are proud of

for which we have made good floors