Our engineering in action

On the example of the floor arrangement for the largest transport and logistics center of Belarus "Prilesye"

Portfolio
Topping floor for a prefabricated warehouse in the Moscow region

TOPPING FLOOR FOR A PREFABRICATED WAREHOUSE IN THE MOSCOW REGION

WE HAVE SAVED FOR THE CLIENT 4 600 300 ₽

FLOOR ENGINEERING CONSTRUCTION Topping floor for a prefabricated warehouse in the Moscow region

Moscow region, the city of Vidnoye, Belokamennoe highway, property 18

Characteristics and description
Company name REAL CONTINENT M LLC
The purpose of the floor and the room itself Topping floor for a prefabricated warehouse in the Moscow region
Type of floor topping floors
Thickness of the concrete layer 15 cm
Room area 6282.5 m²

Customer needs AND THE OPTIMAL ENGINEERING SOLUTION

factors taken into account when developing the floor design

WE HAVE SELECTED THE OPTIMAL ENGINEERING SOLUTION

A prefabricated warehouse was being built in the city of Vidnoye, Moscow region, and at the same time, work on the floor was urgently needed. Initially, the client stated that the expected loads would be up to 7 tons per 1 m2, and we prepared a design calculation for these figures.

But then we made calculations based on the data provided by the customer, and it turned out that not 7 tons, but 5 tons per 1 m2. The client, having studied our calculations, agreed. As a result, the design was chosen as follows: a concrete floor with an average thickness of 150 mm, reinforced with steel fiber.

Terms of work

Number of days for all work: 43

Requirements for the quality of work

Floors must comply with SNiP 2.03. 13-88

Appearance of floors

Must look presentable

Durability

Service life of floors without repair (years): 10

Total cost

Budget within the framework of: 23 001 700 ₽

Topping floor for a prefabricated warehouse in the Moscow region: The object before the start of work — The object before the start of work

undefined undefined

FEATURES OF THE WORK

We proposed to the client and agreed with him on the installation of 3 permanent formworks – 2 transverse lines and 1 longitudinal line, which ultimately divided the entire area into 6 separate sections.

The facility was being built quickly, the customer was in a hurry – his company urgently needed to move from the rented warehouse. Several types of work were carried out simultaneously – the building was still being raised, and at the far end we were already carrying out the first fills. At the same time, another contractor was preparing the sand base in the following areas.

Even before signing the contract, we announced that we would complete all the main work in 6 pours and 12 days. And that's what happened.

An agreement was reached with the concrete plant to use better materials for the preparation of the mixture than usual in the area: cleaner crushed stone, good coarse-grained sand and cement without additives. Yes, it turned out to be a little more expensive, but it had a positive effect on the quality.

OUR RESULTS

We provided the client with the floor that he wanted – smooth and strong. It was also extremely important to complete the work as quickly as possible – and we successfully coped with this.

Stages of implementation engineering design of the floor

engineering design of the floor

The seams are being cut in the first section

A mixer left the concrete plant for the next filling

After grouting the next area, a membrane-forming agent is being applied

Preparing for the filling of the next square

Teamwork between the mixer driver and the concrete pump operator

A moisture-retaining impregnation has been applied to one of the last sections

The result of floor engineeringDELIVERED ON TIME, STANDARD, TECHNOLOGICAL INDUSTRIAL FLOORS AT THE FACILITY REAL CONTINENT M LLC

SEE THE RESULT OF OUR WORK

READ REVIEWS OUR SATISFIED CUSTOMERS

Reviews that we managed to collect between production cycles at our facilities

ReviewsABOUT THE PROFTEHPOL PROJECT

We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.

We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.

Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.

Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.

Our clients Which we are proud of

for which we have made good floors