Portfolio
Topping floor for furniture production and fabric warehouse in Noginsk

TOPPING FLOOR AT THE FURNITURE PRODUCTION AND FABRIC WAREHOUSE IN NOGINSK

WE HAVE SAVED FOR THE CLIENT 449 700 ₽

20%Economy

FLOOR ENGINEERING CONSTRUCTION Topping floor for furniture production and fabric warehouse in Noginsk

Moscow region, the city of Noginsk, Rabochaya street, house 2, building 5

Characteristics and description
Company name Individual entrepreneur
The purpose of the floor and the room itself Topping floor for furniture production and fabric warehouse in Noginsk
Type of floor topping floors
Thickness of the concrete layer 9.5 cm
Room area 689.6 m²

Customer needs AND THE OPTIMAL ENGINEERING SOLUTION

factors taken into account when developing the floor design

WE HAVE SELECTED THE OPTIMAL ENGINEERING SOLUTION

When contacting us, the customer immediately indicated what properties the finished floor should have - not very thick; level for free movement of the hydraulic trolley; non-dusting, so that it would be easy to clean.

The above, combined with the data obtained during the on-site technical inspection, led to the following decision: a topping floor with an average thickness of 9.5 cm with general reinforcement with plastic fiber and additional reinforcement with mesh in several places.

Terms of work

Number of days for all work: 5

Requirements for the quality of work

Floors must comply with SNiP 2.03. 13-88

Appearance of floors

Must look presentable

Durability

Service life of floors without repair (years): 10

Total cost

Budget within the framework of: 2 248 700 ₽

Topping floor for furniture production and fabric warehouse in Noginsk: The object before the start of work — The object before the start of work

Floor arrangement ACCORDING TO THE ENGINEERING SOLUTION FOR THE OBJECT: Individual entrepreneur

how we implemented this floor design

FEATURES OF THE WORK

We additionally reinforced the area of the site with a mesh of about 100 m2, since there were ditches in this place in which the wires were located.

The premises were on the second floor, and the pouring was to be done using a boom concrete pump. Initially, there was a problem with which window opening to run the route through. Many different options were proposed, but the best one turned out to be this: they removed the lower glass from one of the openings.

At most sites, we use damper tape to create an insulating joint between the walls and the floor. Here, the client asked to install the formwork at a distance of 20 cm from the walls. That's what we did.

OUR RESULTS

Our production year 2025 has started very actively, and here is another successfully completed project in our portfolio.

By the way, concrete with an additive to increase mobility (of course, suitable for working with topping) was used here, and it showed itself well visually, and also received a good rating from the crew.

Stages of implementation engineering design of the floor

engineering design of the floor

Transfer of materials to the second floor

Concrete has been poured from the first mixer

Compaction of concrete with a vibrating screed

The result of floor engineeringDELIVERED ON TIME, STANDARD, TECHNOLOGICAL INDUSTRIAL FLOORS AT THE FACILITY Individual entrepreneur

SEE THE RESULT OF OUR WORK

READ REVIEWS OUR SATISFIED CUSTOMERS

Reviews that we managed to collect between production cycles at our facilities

ReviewsABOUT THE PROFTEHPOL PROJECT

We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.

We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.

Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.

Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.

Our clients Which we are proud of

for which we have made good floors