Portfolio
Concrete floor with a reinforcing top layer for the production base of LLC "Good season"

TOPPING FLOOR FOR HANGARS IN BALABANOVO

WE HAVE SAVED FOR THE CLIENT 449 400 ₽

20%Economy

FLOOR ENGINEERING CONSTRUCTION Concrete floor with a reinforcing top layer for the production base of LLC "Good season"

Kaluga region, Balabanovo

Characteristics and description
Company name LLC "Good season"
The purpose of the floor and the room itself Concrete floor with a reinforcing top layer for the production base of LLC "Good season"
Type of floor topping floors
Thickness of the concrete layer 90 cm
Room area 912.4 sq. m.

Customer needs AND THE OPTIMAL ENGINEERING SOLUTION

factors taken into account when developing the floor design

FOUND OUT THE NEEDS OF THE CLIENT

The client turned to us with the task of making a concrete floor with a hardener in two hangars, and both rooms are operational. Ie, it was required to fill in two stages: first, half in each of the hangars, then wait for time and thereby allow the flooded area to dry; then the hangar workers will have to move the goods from the untouched half of each from the premises to the flooded coating; finish the filling on the second halves.

The following aspects are important to the customer:

Terms of work

Number of days for all work: 30

Requirements for the quality of work

Floors must comply with SNiP 2.03. 13-88

Appearance of floors

Must look presentable

Durability

Service life of floors without repair (years): 20

Total cost

Budget within the framework of: 2 247 000 ₽

Concrete floor with a reinforcing top layer for the production base of LLC "Good season": The object before the start of work — The object before the start of work

Floor arrangement ACCORDING TO THE ENGINEERING SOLUTION FOR THE OBJECT: LLC "Good season"

how we implemented this floor design

DIFFICULTIES DURING WORK

In each of the hangars there were not very high racks, and they were not disassembled. Because of this, large two-rotor grout machines simply did not pass in height in those places. The problem was solved by the fact that the floor under the shelves was processed with small "helicopters", and somewhere manually.

The second difficulty is the cold weather. I had to fill the floor quickly so that the concrete pump would not freeze.

OUR RESULTS

Concrete floors were filled in two hangars on time, of proper quality and without any complaints from the customer. In one of the rooms, a green topping was made – in our opinion, it looks very aesthetically pleasing. You can see this for yourself by looking at the photos of the stages of work below on this page.

Thanks to the work in these hangars, we have added another region of our vast country, the Kaluga Region, to our geography of completed objects.

Stages of implementation engineering design of the floor

engineering design of the floor

We have prepared the equipment for dismantling

The floor is ready to be filled with a new coating

We are installing a route for concrete supply

The concrete mixture was filled and leveled

Green topping was applied to the surface

The result of floor engineeringDELIVERED ON TIME, STANDARD, TECHNOLOGICAL INDUSTRIAL FLOORS AT THE FACILITY LLC "Good season"

SEE THE RESULT OF OUR WORK

READ REVIEWS OUR SATISFIED CUSTOMERS

Reviews that we managed to collect between production cycles at our facilities

ReviewsABOUT THE PROFTEHPOL PROJECT

We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.

We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.

Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.

Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.

Our clients Which we are proud of

for which we have made good floors