| Characteristics and description |
|---|
Company name Moscow Gas Processing Plant JSC |
The purpose of the floor and the room itself Topping floor for tractor repair area in Moscow region |
Type of floor topping floors |
Thickness of the concrete layer 14.5 cm |
Room area 597 m² |
4.5 years later, the customer turned to us again for work. The area of the current facility has almost doubled the previous one.
Taking into account the features of the base, the construction was chosen not quite standard – a topping floor with an average thickness of 14.5 cm with combined reinforcement with a 6 mm diameter road mesh and steel fiber.
Terms of work Number of days for all work: 10 |
Requirements for the quality of work Floors must comply with SNiP 2.03. 13-88 |
Appearance of floors Must look presentable |
Durability Service life of floors without repair (years): 10 |
Total cost Budget within the framework of: 3 746 100 ₽ |
The base of the room was made of concrete, but due to too large fluctuations, it was decided to prepare a sand layer. At first, the customer himself did this, but it was agreed that we would do the final work on this stage. And it turned out to be a very correct decision!
There were pieces of brick and other construction debris in the sand – such elements are not suitable for the base of the floor at all. We removed them manually and with a tractor provided by the customer.
And then, using the imported sand, we made the required height level over the entire area, compacted the base and began our standard work on the installation of an industrial floor.
Most recently, the main works at this facility have been successfully completed, and new negotiations are already underway with the customer – he wants a good floor on the street from the gate to the road.
We are well aware that reviews of companies can be very different. Working in the construction market for more than 15 years, we have faced various situations.
We have both satisfied customers and those who are not. But, there is one important thing: we always bring the cycles of our provision to the end. If a client has problems, then we do not leave him with them, but settle them to a full and final conclusion.
Working with us, you can be sure that we will make you an industrial floor that is exactly right for the task for which you needed it.
Thanks to a good knowledge of the technology of industrial floors, we have gathered a lot of practical experience in using floor structures in various difficult places. We solve non-trivial problems and often, when we take an order, 3-4 companies have already tried to take it before us, but refused due to the complexity of the object.